537618
219
Zoom out
Zoom in
Previous page
1/252
Next page
219
MIDI Implementatie
3. Data Reception (Sequencer Section)
3.1 Messages recorded during recording
Channel Voice Messages
Note Off
Status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=note number: 00H - 7FH (0 - 127)
vv=note off Velocity: 00H - 7FH (0 - 127)
* Not received when the Note parameter (Recording Select window) is OFF.
Note on
Status 2nd byte 3rd byte
9nH kkH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=note number: 00H - 7FH (0 - 127)
vv=note on Velocity: 01H - 7FH (1 - 127)
* Not received when the Note parameter (Recording Select window) is OFF.
Polyphonic Aftertouch
Status 2nd byte 3rd byte
AnH kkH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=note number: 00H - 7FH (0 - 127)
vv=Polyphonic Aftertouch: 00H - 7FH (0 - 127)
* Not received when the Poly Afertouch parameter (Recording Select window) is OFF.
Control Change
Status 2nd byte 3rd byte
BnH kkH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=Control number: 00H - 78H (0 - 120)
vv=value: 00H - 7FH (0 - 127)
* Not received when the Control Change parameter (Recording Select window) is OFF.
Program Change
Status 2nd byte
CnH ppH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
pp=Program number: 00H - 7FH (prog.1 - prog.128)
* Not received when the Program Change parameter (Recording Select window) is OFF.
Channel Aftertouch
Status 2nd byte
DnH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
vv=Channel Aftertouch: 00H - 7FH (0 - 127)
* Not received when the Channel Aftertouch parameter (Recording Select window) is
OFF.
Pitch Bend Change
Status 2nd byte 3rd byte
EnH llH mmH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
mm, ll=Pitch Bend value: 00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* Not received when the Pitch Bend parameter (Recording Select window) is OFF.
Channel Mode messages
All Sound Off (Controller number 120)
Status 2nd byte 3rd byte
BnH 78H 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
Reset All Controller (Controller number 121)
Status 2nd byte 3rd byte
BnH 79H 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
Omni Off (Controller number 124)
Status 2nd byte 3rd byte
BnH 7CH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
Omni On (Controller number 125)
Status 2nd byte 3rd byte
BnH 7DH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
Mono (Controller number 126)
Status 2nd byte 3rd byte
BnH 7EH mmH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
mm=mono number: 00H - 10H (0 - 16)
* The same processing will be done as when an All Note Off message is received.
Poly (Controller number 127)
Status 2nd byte 3rd byte
BnH 7FH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
System Exclusive Messages
Status Data byte Status
F0H iiH, ddH, ......, eeH F7H
F0H: System Exclusive message status
ii=ID number: This is the ID number (manufacturer ID) that specifies the
manufacturer whose exclusive message this is. Roland’s manufacturer
ID is 41H. ID numbers 7EH and 7FH are defined in an expansion of
the MIDI standard as Universal Non-real-time messages (7EH) and
Universal Realtime Messages (7FH).
dd,..., ee = data: 00H - 7FH (0 - 127)
F7H: EOX (End of System Exclusive)
* Not received when the System Exclusive parameter (Recording Select window) is OFF.
*MIDI Machine Control and MIDI Time code is not recorded. (Refer to ‘1.3 Messages
acknowledged for synchronization’)
219


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Juno-G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Juno-G in the language / languages: Dutch as an attachment in your email.

The manual is 8,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info