499471
77
Zoom out
Zoom in
Previous page
1/136
Next page
77
Other Settings
Utility functions let you save user data to USB memory or restore data
from USB memory back to the JUNO-Di. You’ll also use these utility
functions when you want to return the JUNO-Di to its factory settings, or
initialize USB memory.
Connect your USB memory after you’ve turned the JUNO-Di’s
power on. Never disconnect the USB memory while the power
is turned on.
Use USB memory sold by Roland. We cannot guarantee correct
operation if other products are used.
When you save settings from the JUNO-Di to USB memory, the following
settings are saved.
User data for tones and performances
Favorites
MIDI Controller mode settings
The tones that are selected first by each tone button
System settings
Here’s how to save user data to USB memory. This operation is called
“Backup.”
1.
Press the [MENU] button.
The “MENU” screen will appear.
2.
Use the [
] [ ] buttons to select “UTILITY,” and press
the [ENTER] button.
The “UTILITY” screen will appear.
fig.disp-uility.eps_70
3.
Use the [
] [ ] buttons to select “BACKUP,” and
press the [ENTER] button.
The following screen will appear.
fig.disp-utilbackup.eps_70
4.
Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the backup has been completed, you will return to the
“UTILITY” screen.
Here’s how to restore backed-up user data from USB memory into the
JUNO-Di. This operation is called “Restore.”
All user data will be rewritten when you execute the Restore
operation. If the JUNO-Di contains important data that you
want to keep, you must save it to a separate USB memory
device before you execute Restore.
1.
Press the [MENU] button.
The “MENU” screen will appear.
2.
Use the [ ] [ ] buttons to select “UTILITY,” and press
the [ENTER] button.
The “UTILITY” screen will appear.
3.
Use the [
] [ ] buttons to select “RESTORE,” and
press the [ENTER] button.
The following screen will appear.
fig.disp-utilrestore.eps_70
4.
Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the restore operation has been completed, the following
screen will appear.
fig.disp-restorecomp.eps
5.
Turn the power of the JUNO-Di off, then on again.
Backing Up or Initializing Data
(UTILITY)
Types of Data that can be Saved
Saving Data to USB Memory (BACKUP)
Restoring Saved Data from USB Memory
Back into the JUNO-Di (RESTORE)
JUNO-Di_e.book 77 ページ 2009年6月22日 月曜日 午前9時23分
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Juno Di at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Juno Di in the language / languages: English as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info