467935
26
Zoom out
Zoom in
Previous page
1/40
Next page
26
Chapter 4. Connecting External Devices
Connecting MIDI Devices
By connecting an external MIDI device and exchanging
performance data, you can control the performances on one
device from the other. For instance, you can output sound
from the other instrument or switch tones on the other
instrument.
What’s MIDI?
MIDI stands for Musical Instrument Digital Interface, an
international standard which allows performance
information to be communicated among electronic musical
instruments and computers.
The HP101 provides MIDI connectors, which allow
performance data to be exchanged with external devices.
When these connectors are used to connect the HP101 to
external devices, an even wider range of possibilities
becomes available.
*A separate publication titled “MIDI Implementation” is also
available. It provides complete details concerning the way
MIDI has been implemented on this unit. If you should require
this publication (such as when you intend to carry out byte-
level programming), please contact the nearest Roland Service
Center or authorized Roland distributor.
Connection Examples
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the HP101 from a MIDI sequencer/
Recording an HP101 performance on a MIDI
sequencer
fig.midi2.e
* Set Local Off if you have connected the HP101 to a MIDI
sequencer. Refer to “Switching Local Control On and Off” (p.
27). Also set your MIDI sequencer to MIDI Thru mode (so
that messages received at MIDI IN will be re-transmitted
without change from MIDI OUT). For details, refer to the
owner’s manual of your MIDI sequencer.
Perform on the HP101 to play a MIDI sound
generator
fig.midi1.e
MIDI Send Channel Settings
MIDI features sixteen MIDI channels, numbered 1–16.
Simply connecting a cable is not enough for communication
to take place. The connected devices must be set to use the
same MIDI channels. Otherwise, no sound will be produced,
and no sounds can be selected.
* The HP101 receives all channels 1–16.
When the HP101 is turned on, Channel “1” is selected.
1.
While holding down the [Metronome] and [Reverb/
Key Touch] buttons, press the appropriate key (C6–
E 7) on the keyboard.
The MIDI transmit channel will switch to the number
that corresponds to the note you pressed.
HP101
MT Series
* MT-90s has no MIDI Out connector.
InOut
MIDI
HP101
Sound Module
OUTTHRU IN
MIDI
C7C6 C8
121
2791114164
356810 13 15
Press
While holding down
two buttons...
HP101_e.book 26 ページ 2005年4月19日 火曜日 午後4時33分
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland HP 101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland HP 101 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info