467935

Roland HP 101 Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
25
Chapter 4. Connecting External Devices
Connecting to Audio Equipment
You can connect audio devices to play the sound of the
HP101 through the speakers of your audio system, or to
record your performance on a tape recorder or other
recording device.
When connecting, please use an audio cable with a standard
phone plug (sold separately).
Connection Examples
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing the sound of the HP101 through the
speakers of an audio system/Recording the
performance of the HP101 on a recording device
fig.audio1.e
❍
Use the following procedure when turning on the power.
1.
Turn on the power of the HP101.
2.
Turn on the power of the connected device.
3.
Adjust the volume of each device.
→
You can adjust the volume of a connected sound module with
the HP101.
When Recording HP101 Performances on a Recording
Device
4.
Start recording with the connected device.
5.
Perform on the HP101.
6.
When the performance ends, stop recording on the
connected equipment.
Playing the sound of an audio device through the
speakers of the HP101
fig.audio2.e
❍
Use the following procedure when turning on the power.
1.
Turn on the power of the connected device.
2.
Turn on the power of the HP101.
3.
Adjust the volume of each device.
* You cannot use the HP101 to adjust the volume of the
connected sound generating device.
Turning off the power
1.
Set the volume of the HP101 and of the connected
devices to the minimum position.
2.
Turn off the power to the HP101.
3.
Turn off the connected equipment.
Connecting to a Computer
You can use a USB MIDI interface cable (sold separately) to
connect the HP101 to your computer.
You can connect the HP101 to a computer that has Roland’s
Visual MT or other sequencer software installed, and then
play performances from the software through the HP101.
Connection Examples
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
* In order to make connections to your computer, you must
install “MIDI driver” software on your computer. For details,
refer to the owner’s manual for your MIDI interface.
Use a USB MIDI interface cable to connect the USB
connector of your computer to the MIDI connectors of
the HP101.
fig.comp.e
HP101
Input R/L
(Line In, Aux In)
HP101
Output R/L
(Line Out, Aux Out)
USB MIDI
interface cable
Computer
MIDI IN
MIDI OUT
USB Connector
of your Computer
HP101
HP101_e.book 25 ページ ２００５年４月１９日　火曜日　午後４時３３分
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland HP 101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland HP 101 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info