710397
23
Zoom out
Zoom in
Previous page
1/32
Next page
23
System Settings
Pad/Button Item Value (Bold: default) Explanation
TR-S section
[BD] AUX mode
On
,
OFF
If this is On, the input signals to INPUT CH 1–4 and USB 3–4 are output without change to
MASTER OUT when the [INPUT SELECT] switch (front panel) is set to PC.
[SD] Backspin length
OFF
, (Short),
nrNL
(Normal),
Long
(Long)
When applying backspin to the jog dial, this setting lets you make backspin continue longer
than the distance that the jog dial actually rotated.
OFF Backspin operation occurs according to the actual distance of rotation.
Short Backspin operation is shorter than with the Normal setting.
Normal Backspin operation occurs longer than the actual distance of rotation.
Long Backspin operation is longer than with the Normal setting.
[ACC] Reverb type setting for the VT section
(Reverb),
dd
(Delay),
(Reverb + Delay )
Species the eect that is operated by the [REVERB] knob of the VT section.
Reverb Reverb is applied.
Delay Delay is applied.
Reverb +
Delay
Reverb and delay are applied simultaneously.
SERATO SAMPLER
[1]–[5] buttons
TR-S pad color scheme 1–5 (ve types)
Species the color scheme of the TR-S pads.
To view the color scheme assigned to each of the [1]–[5] buttons, hold down a button.
[AUTO PITCH] button Adjusts the level during ducking
-6
,
-18
,
-24
,
InF
(dB)
Adjusts the output level of signals other than the mic when the mic switch is set to “DUCK.
Adjusting the Performance Pad Sensitivity
1. While holding down the [PANEL] button, press the [POWER]
switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the
TR-S section is blinking.
2. Press the performance pad whose sensitivity you want to
adjust.
The pad you press is lit red.
3. Use the [VALUE] knob to change the value of the setting.
Value (Bold: default) Explanation
0
50
300
The lower the value, the greater the sensitivity.
* If the sensitivity is too great, vibrations of the DJ-808 itself might make
the pad operate unintendedly.
Take care not to make the sensitivity excessive.
4. When you’ve nished making settings, press the blinking
[START/STOP] button.
The display shows
U-ait
, and after a while returns to the normal state.
Returning to the Factory Settings (Factory Reset)
The system settings and TR-S patterns stored in the DJ-808 can be returned
to their factory-set state (factory reset).
1. Hold down the [BACK] button of the browser section, and press
the [POWER] switch to turn on the power.
The display indicates
rst
, and the [START/STOP] button of the TR-S
section blinks.
* If you decide to cancel the operation, turn o the power.
2. Press the blinking [START/STOP] button.
Factory reset begins.
When the display indicates
O cW
, factory reset is complete.
NOTE
Never turn o the power until the display indicates
O cW
.”
3. After the factory reset is complete, press the [POWER] switch to
turn the power o and then on again.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-808 in the language / languages: English as an attachment in your email.

The manual is 6,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-808

Roland DJ-808 User Manual - German - 32 pages

Roland DJ-808 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info