710397
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
System Settings
1. While holding down the [PANEL] button, press the [POWER] switch to turn on the power.
The DJ-808 is in system setting mode, and the [START/STOP] button of the TR-S section is blinking.
2. Press the TR-S pad or button that corresponds with the setting you want to make.
The display shows the current value.
3. Use the [VALUE] knob to change the value of the setting.
4. When you’ve nished making settings, press the blinking [START/STOP] button.
The display shows
U-ait
, and after a while returns to the normal state.
Pad/Button Item Value (Bold: default) Explanation
TR-S pad
[1] Sampling rate
44.1
,
48
,
96
(kHZ)
Species the DJ-808’s sampling rate.
[2] Master output attenuator level
0
,
-3
,
-6
,
-12
,
-18
(dB)
Species the attenuation level of the master output. The master output level decreases by
the amount of this value.
[3] EQ ([HI]/[MID]/[LOW] knobs) maximum value
6db
,
12db
Species the maximum value of the equalizer.
When the [HI]/[MID]/[LOW] knobs of each channel are turned all the way to the right, they
have the value specied here.
* This setting is eective only in stand-alone mode.
[4] Cross fader curve
Line
(Linear),
poU-
(Power)
Species the curve of the cross fader.
left/rightcenter
low
high
Position of fader
Level
Linear Power
* This setting is eective only in stand-alone mode.
[5] Performance pad velocity curve
LoU-
(Low),
Nid
(Mid),
Hi
(Hi)
Species the velocity curve of the performance pads (the way in which the level changes in
response to the strength of your strike on the pad).
strongweak
low
high
Strength of pad strike
Level
Low Mid Hi
[6] SYNC mode setting
On
,
OFF
Species whether to automatically connect with Serato DJ (On) or not (OFF).
If this is OFF, it is not possible to connect with Serato DJ.
[7] Margin at both ends of cross fader
0
,
1
10
Species the margin at both ends of the cross fader. Higher values increase the margin,
providing more play at each end of the cross fader.
[8] BOOTH OUT jack setting
On
,
OFF
Species whether the mic audio is output (On) or is not output (OFF) from the BOOTH OUT
jacks.
[9] Mic audio low cut lter setting
OFF
,
1
10
Adjusts the strength of the low cut lter applied to the mic audio.
1–10 Higher values produce a stronger eect.
OFF The low cut lter is not applied.
[10] Mic audio noise gate setting
OFF
,
1
,
2
10
Species the strength of the noise gate applied to the mic audio.
1–10 As the value increases, even higher-level sound will be cut.
OFF The noise gate is not applied.
[11] Jog dial illumination mode
0
,
1
Species how the jog dial indicators are illuminated.
0 Only the indicator at the playback position is lit.
1 Only the indicator at the playback position is unlit.
[12] Swap channels
On
,
OFF
Species whether the PC (USB) outputs of channels 1 and 3 and channels 2 and 4 are
swapped.
On Swap the outputs of channels 1 and 3 and channels 2 and 4.
OFF Don’t swap. The outputs are as printed on the panel.
[13] TR-REC input mode
808
,
909
Species the input method for TR-REC.
808
Use the 808 method; the note switches between on/o each time you press
a TR-S pad.
909
Use the 909 method; the note switches between on/quiet/o each time you
press a TR-S pad.
[14] Demo mode time setting
OFF
,
1
10
30
Species the time (minutes) from when the DJ-808 was last operated until it enters demo
mode.
If this is OFF, demo mode will not operate.
[15] Auto O function (p. 10) setting
On
,
OFF
When no operation has been performed for a certain length of time, the power turns o
automatically. If you don’t want the power to turn o automatically, set this “OFF.
[16] TRS section knob mode
PiccW
(Pick),
JUNP
(Jump)
Species how the knobs in the TR-S section operate.
Pick
If there is a discrepancy between the recalled value and the position of the
knob, data is output only after you turn the knob to the position that matches
the value.
Jump Data is always output according to the position of the knob.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-808 in the language / languages: English as an attachment in your email.

The manual is 6,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-808

Roland DJ-808 User Manual - German - 32 pages

Roland DJ-808 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info