Manual Roland DJ-808 (page 17 of 32) (English)

710397

Zoom out

Zoom in

1/32

Operating the DJ-808

MEMO

By tapping the [TAP] button at the desired interval, you can set the

value that is the basis for the time at which the eect is applied.

Single FX Mode Operations

1. Hold down the [SHIFT] button and press the [TAP] button to

select single FX mode.

Each time you press the button, you alternate between single FX mode

and multi FX mode.

2. Press the [1] or [2] button of the deck (channel) that you want

to operate, to select the eect unit that will be used.

In the DJ-FX panel of the Serato DJ screen, the number of the deck that

uses the eect unit is highlighted.

3. Hold down the [SHIFT] button and press the eect button to

select the eect type.

It does not matter which eect button you press.

The eect type changes each time you press the button.

4. Press the eect 1 button to turn the eect on (button lit).

5. Press the eect 2 or 3 button to switch the value of the eect

parameters.

6. Use the eect parameter 2 or 3 knobs to adjust the value of the

eect parameters.

7. Use the eect parameter 1 knob to adjust the eect depth.

8. Use the [BEATS] knob to adjust the time at which the eect is

applied.

* If you press the knob, the setting is set to “1.”

MEMO

By tapping the [TAP] button at the desired interval, you can set the

value that is the basis for the time at which the eect is applied.

Changing the Eect Tempo

Serato DJ lets you set the tempo of the eect in either of two ways.

Auto tempo mode (default setting)

The eect tempo is determined based on the BPM value of the song.

Manual tempo mode

The basic tempo (BPM value) for the eect is set by the interval at which

you tap the [TAP] button.

Switching the tempo mode

5 In auto tempo mode, tap the [TAP] button three or more times to

switch to manual tempo mode.

5 In manual tempo mode, long-press the [TAP] button to reset the

specied tempo and switch to auto tempo mode.

Recording

You can use Serato DJ’s recording functionality to record sounds that

you’ve mixed on the DJ-808.

* For details, refer to the Serato DJ owner’s manual.

1. In the browser section, press the [PANEL] button to open the

REC panel.

2. Click [REC] to start recording.

3. To stop recording, click [REC] once again.

4. To save, enter a le name in the text entry eld and click [Save].

Inputting Sound from an External Device

Audio from devices such as a DJ player or turntable (analog) can be input

directly to the rear panel INPUT (CH 1–CH 4) jacks, and mixed by the DJ-

808’s mixer section.

You can also use Serato DJ’s eect units to apply eects to the external

audio inputs.

You can use the VT section to apply a voice eect to the audio input from a

mic connected to the MIC IN jack.

Inputting Sound from a DJ Player

1. Connect your DJ player or other line-level device to any of the

INPUT (CH 1–CH 4) jacks.

2. As appropriate for the channel to which your line-level device

is connected, set the corresponding front panel [INPUT

SELECT] switch to “LINE.”

3. Use the [TRIM] knob and channel fader to adjust the output

level.

5 You can use the [HI], [MID], and [LOW] knobs to adjust the volume of

the high, mid, and low-frequency regions.

5 You can use the [CHANNEL FX] buttons to apply eects.

5 You can operate the eect section to apply Serato DJ’s eects.

Inputting Sound from a Turntable

1. Connect your turntable to either of the INPUT jacks (CH 1 or CH

2).

2. As appropriate for the channel to which your turntable is

connected, set the front panel [INPUT SELECT] switch to

“PHONO.”

3. Use the [TRIM] knob and channel fader to adjust the output

level.

5 You can use the [HI], [MID], and [LOW] knobs to adjust the volume of

the high, mid, and low-frequency regions.

5 You can use the [CHANNEL FX] button to apply eects.

5 You can operate the eect section to apply Serato DJ’s eects.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-808 in the language / languages: English as an attachment in your email.

The manual is 6,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-808

Roland DJ-808 User Manual - German - 32 pages

Roland DJ-808 User Manual - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland DJ-808 Manual

Product: