710374
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
Using Serato Flip
Flip Operations
Here we explain the procedure for using Serato Flip to create a song that
has a dierent structure than the original song.
Intro Verse 1 Verse 2 Ending
Verse 1 Verse 1 Verse 2 Ending
Original song
NOTE
You can use the PARAMETER [−] [+] buttons to operate Flip only in HOT
CUE mode.
Specifying Hot Cue
1. Load the song.
2. Press the [HOT CUE] button to make it light white.
Hot cue mode is selected.
3. Press a performance pad to make the hot cue settings shown in
the illustration below.
HOT CUE
1
Intro Verse 1 Verse 2 Ending
HOT CUE
2
Creating a Flip
1. In Serato DJ, click the [Flip] key to access the Flip panel.
2. In the virtual deck screen, click the Flip tab to see the Flip slots.
3. Press the PARAMETER [−] button to select the Flip record-ready
state.
4. Play back the song, and operate hot cue as shown in the
illustration below.
Verse 1 Verse 1 Verse 2 Ending
HOT CUE
1
HOT CUE
1
5. Press the PARAMETER [−] button once again to stop Flip
recording.
When Flip recording stops, loop playback of the recorded Flip starts.
* The recorded Flip is held in temporary memory, and is not yet saved. If
you exit Serato DJ without saving it to a Flip slot, the Flip is lost.
Saving the Flip
1. In the virtual deck screen, click a Flip slot to select the save-
destination for the Flip.
2. In the Flip panel, click [Save].
Recalling and Playing a Flip
1. In the virtual desk screen, click a Flip slot to select a Flip slot.
2. Hold down the [SHIFT] button and press the PARAMETER [−]
button to turn Flip loop playback on/o.
If Flip slot loop in the virtual deck screen or Flip loop in the Flip panel is
highlighted, the Flip plays as a loop.
* If there is an unsaved Flip in temporary memory, the loop setting of
the Flip in temporary memory is turned on/o. If the Flip in temporary
memory is saved to a Flip slot, the loop setting of Flip in the selected
Flip slot is turned on/o.
3. Play back the song, and press the PARAMETER [+] button to
play the Flip.
* If there is an unsaved Flip in temporary memory, the Flip that is in
temporary memory is recalled. If the Flip in temporary memory is saved
to a Flip slot, the Flip that is in the selected Flip slot is recalled. The
recalled Flip plays from the beginning of the Flip.
5 By holding down the [SHIFT] button and pressing the PARAMETER [+]
button, you can turn the Flip on without moving to the start of the Flip.
In this case, the Flip plays when the song playback location reaches the
beginning of the Flip.
Moving to the beginning of the Flip while a Flip is playing
1. While the Flip is playing, press the PARAMETER [+] button.
Each time you press the button, playback returns to the beginning of
the Flip and continues.
4. To end the Flip, hold down the [SHIFT] button and press the
PARAMETER [+] button.
Saved Flip Operations
By pressing a performance pad you can play back a saved Flip.
1. Press the [HOT CUE] button twice to make the button light
orange.
Saved Flip mode is selected.
2. Press a lit performance pad.
The Flip that is in the Flip slot corresponding to the pad you pressed starts
playing.
5 If you hold down the [SHIFT] button and press a lit performance pad,
the Flip that is in the corresponding Flip slot is recalled, but you wont
move to the beginning of the Flip. In this case, the Flip plays when the
song playback position reaches the beginning of the ip.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-505 in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-505

Roland DJ-505 User Manual - German - 32 pages

Roland DJ-505 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info