710336
11
Zoom out
Zoom in
Previous page
1/48
Next page
11
Names of things and what they do
4. INPUT 3/4
These are high impedance jacks that allow a guitar or bass to be connected.
SENS knobs
These knobs adjust the input level.
Peak indicators (PEAK)
These indicators will light in red at a point -6 dB below the level at which
distortion begins. Adjust the SENS knobs so that the peak indicators do not
light.
5. INPUT 5/6
SENS knob
This knob adjusts the input level of the rear panel TRS balanced inputs (5/6).
Peak indicator (PEAK)
This indicator will light in red at a point -6 dB below the level at which
distortion begins. Adjust the SENS knob so that the peak indicators do not
light.
6. INPUT 7/8
This is an optical digital input jack that allows input from a CD/MD/DAT.
DIGITAL/ANALOG select switch
This switches between the rear panel TRS balanced inputs (7/8) and the
optical/coaxial digital inputs.
SENS knob
If the select switch is set to the ANALOG position, this knob adjusts the input
level of the rear panel TRS balanced inputs (7/8).
Peak indicator (PEAK)
This indicator will light in red at a point -6 dB below the level at which distortion
begins. Adjust the SENS knob so that the peak indicators do not light.
7. Headphone jack
Headphones can be connected here. At the default settings, the input from
INPUT 1/2 will be monitored, but you can change the Control Panel settings
(described later) to switch the input jacks that will be monitored. For details
on the Control Panel, refer to
DA-PCI Control Panel
(p. 32).
8. Headphone volume knob
This knob adjusts the volume of the headphones.
9. OUTPUT indicators
When audio data is being output from the DA-2496, the corresponding
output indicators will light to show the level.
10. Power switch
fig.1-01aE
This turns the power of the DA-2496 on/off.
The power is on when the switch is pressed
in, and off when the switch is in the outward
position. When the power is on, the indicator
at the upper left of the power switch will light
in green.
It is not possible to adjust
the input level from the
digital input jacks. You
must adjust the output
level of the playback
device.
ON
Lower position
OFF
Upper position
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DA-2496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DA-2496 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info