710336
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
Names of things and what they do
DA-2496
Front panel
fig.DA-2496
1. Clock select switch
This switches between the DA-2496s own internal clock and an external
clock. (p. 40)
2. LOCK indicator
This will light when word clock is being received correctly from the DA-PCI
or another digital device.
3. INPUT 1/2
These are combo-type jacks that allow either phantom-powered XLR
balanced connections or TRS balanced connections. Condenser mics or audio
devices that provide TRS balanced output can be connected here.
* This instrument is equipped with balanced (XLR/TRS) type input jacks. Wiring
diagrams for these jacks are shown below. Make connections after first checking the
wiring diagrams of other equipment you intend to connect.
fig.XLR/TRS1
Phantom power supply ON/OFF button (PHANTOM 48V)
This switches the power supply on/off.
-20 dBu/+4 dBu select switch (PAD 24 dB)
This switches the input level. When connecting a low output gain device such
as a mic, set this to the OFF position.
SENS knobs
These adjust the input level.
Peak indicators (PEAK)
These indicators will light in red at a point -6 dB below the level at which
distortion begins. Adjust the SENS knobs so that the peak indicators do not
light.
132 5 6 7 8 1094
1:GND
2:HOT
3:COLD
GND(SLEEVE)
HOT(TIP)
COLD(RING)
Always turn the phantom
power off when
connecting any device
other than condenser
microphones that require
phantom power. You risk
causing damage if you
mistakenly supply
phantom power to
dynamic microphones,
audio playback devices, or
other devices that dont
require such power. Be
sure to check the
specifications of any
microphone you intend to
use by referring to the
manual that came with it.
(This instruments
phantom power: 48 V DC,
10 mA Max)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DA-2496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DA-2496 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info