527871
59
Zoom out
Zoom in
Previous page
1/116
Next page
59
Chapter 5. Replacing phrases to create a different pattern (MEGAMIX)
Chapter 5
Saving the pattern you
rearranged
When you have used MEGAMIX to create a pattern that you
like, you can save it as a User Pattern. The saved pattern can
be recalled during normal pattern playback, just as any other
pattern.
If you edit another pattern, switch to Song mode, or turn off
the power without saving the pattern you recorded or edited,
your edits will be lost.
* You must stop pattern playback before saving the pattern.
1. Use MEGAMIX to create a pattern.
2. Press [ ] to stop pattern playback.
3. Press [WRITE].
A screen will appear in which you can specify the save-
destination pattern.
4. Turn [VALUE] to specify the save-destination
pattern.
The data will be saved in the pattern you specify here. Be
careful not to specify the wrong pattern, since the
pattern that was previously saved in this location will be
erased.
5. Press [ENTER].
The display will ask SurE (are you sure you want to
proceed with the save?).
6. To save the data, press [ENTER].
* To cancel without saving, press [EXIT].
After the data has been saved, the save-destination
pattern number will be displayed.
Tips when using MEGAMIX to create a
pattern
If the patterns that you combine using MEGAMIX have
different time signatures or a different number of
measures, their playback may not be connected
appropriately. When using MEGAMIX to combine
patterns, it is best to combine patterns of the same
number of measures and time signature.
When you use MEGAMIX to replace phrases within a
pattern, the volume balance of the parts may change
significantly, depending on the phrase that you replaced.
In such cases, you should re-adjust the Part Level (p. 19)
before you save the pattern.
Most of the preset patterns have the following part
structure.
Keeping the above structure in mind, you can replace
part 2 when you wish to replace the bass, replace part R
when you wish to replace the drums, and so on.
If you follow the above guidelines when creating user
patterns as sell, it sill be easier to use your patterns with
MEGAMIX.
It is not possible to perform MEGAMIX between part R
and parts 17.
Part R Drums
Part 1 For D-FIELD performance (contains no
performance data)
Part 2 Bass
Parts 37 Chords, lead, other
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info