527871

Roland D-2 GROOVEBOX Manual

58
Zoom out
Zoom in
Previous page
1/116
Next page
58
Chapter 5. Replacing phrases to create a
different pattern (MEGAMIX)
MEGAMIX is a function which lets you play back a pattern
while you exchange the musical data of one part with the
data from a different pattern. You can combine phrases for
each instrument to create a completely different pattern, just
as if you were creating a remix.
fig.AAA
* This diagram is intended to explain the concept of
MEGAMIX. It does not imply that phrases of actual patterns
are as shown in the diagram.
Replacing phrases
* MEGAMIX can be used both when a pattern is playing or
stopped.
1. Press [PATTERN] to select Pattern mode.
2. Use [VALUE] to select a pattern.
3. Press [MEGAMIX] to select MEGAMIX mode.
4. Press [PART SELECT].
The part button of the currently selected part (current
part) will light.
5. Press the part button ([R] or [1]–[7]) of the part that
you wish to replace, making it the current part.
6. Turn [VALUE] to select the pattern containing the
performance data that you wish to use.
7. Press a part button [R] or [1]–[7] to select the part
containing the performance data.
The part button of the current part will change from
blinking to lit, and the part button of the selected part
will blink.
* If you select the same part as the current part, the part button
of the current part will blink.
8. Press [ENTER].
* To cancel, press [ENTER].
The part button of the current part will remain lit, and
the part button of the selected part will go dark.
* If you selected the same part as the current part in step 7, the
part button of the current part will change from blinking to lit.
The performance data of the selected part will be placed in
the current part, and the performance will change when the
currently-sounding pattern makes a complete cycle.
It is not possible to perform MEGAMIX between part R and
parts 1–7.
Using D-FIELD for MEGAMIX
If D-FIELD function ASSIGN 1 is set to “PCL (Pattern Call),”
entering MEGAMIX mode will let you use the eight areas of
the D-FIELD to access the performance data assigned to each
part.
For details refer to p. 30.
C16
B14
A21
A21
A25
A21
A22
A15
A21
PATTERN
MEGAMIX
* Even after you exit MEGAMIX mode, the state you
created using MEGAMIX will be maintained until you
select a different pattern. [MEGAMIX] will blink during
this time.
* It is not possible to record a pattern in the state you
created using MEGAMIX. If you wish to record, you
must first save the pattern (see next page).
* The time signature and number of measures of the pattern
that is played by MEGAMIX will depend on the time
signature and number of measures of the Rhythm part.
Also, the mute status of each part will be maintained
during MEGAMIX.
* If you switch to a part that contains no performance data,
that part will not play anything. In each of the preset
patterns, part 1 contains no performance data (regardless
of the pattern you select). For other parts as well, please be
aware that the part you select may not necessarily contain
performance data.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info