527871

Roland D-2 GROOVEBOX Manual

43
Zoom out
Zoom in
Previous page
1/116
Next page
43
Chapter 4. Applying Effects to the Sound (Effects)
Chapter 4
Delay (Add echoes to the sound)
Delay is an effect which adds echoes to the sound. It is effective when applied to solo phrases or to densely rhythmic phrases.
Described here is how to set the Delay effect.
Turning delay on/off
Delay is turned on by pressing [DELAY] and confirming that its indicator has lighted. To turn it off, press the button again,
extinguishing the indicator.
* This lets you turn the effect on/off for all parts regardless of other settings.
Adjusting the delay volume for individual parts
Refer to the explanation of “Part Delay Level” in “Modifying the settings of each part” (p. 19).
Making detailed settings
1. Hold down [DELAY] and press [EDIT].
* If the D-FIELD function ASSIGN 2 is set to “DELAY,” you can also access the setting screen by holding down the D-FIELD function
button [ASSIGN 2] and pressing [EDIT].
2. Press [ENTER] to select a parameter.
3. Turn [VALUE] to modify the setting.
4. When you are finished, press [EXIT].
* 1: 16 (16th note), 8T (8th note triplets), 16. (dotted 16th note), 8 (8th note), 4T (quarter note triplets), 8. (dotted 8th note), 4 (quarter note), 2T (half note
triplets), 4. (dotted quarter note), 2 (half note)
* Parameters with an “X” or “Y” following the value will be selected when using D-FIELD to control the delay (p. 39). “X” can be controlled by moving
your finger to left and right, and “Y” by moving your finger up and down.
Screen Parameter Explanation Value
TYPE Selecting the type. SHORT, LONG
TIME Adjusts the time from the original sound until
when the delayed sound is heard (the interval be-
tween repeats).
* On the D-2, it is not possible to set a delay time
longer than 1 second. When the delay time is
synchronized to the BPM, selecting a note value
which would make the delay time exceed 1second
will cause the delay time to be halved, and the
delay sound will be heard at 1/2 the specified
interval. In addition, even if 1/2 the length would
exceed 1 second, the delay time will be shortened
to 1/4 the length.
When “TYPE” is SHORT: 0.1-275 (ms)
When “TYPE” is LONG: 200 (ms)-1 (s), notes
(*1)
X
FEEDBACK Sets the amount of delayed sound to be repeated, as
a proportion of the original sound.
0–98 (%)
Y
HF DAMP Specifies the frequency at which the high frequency
portions of the reverberation will be cut. Lowering
this setting will cause more of the upper frequency
content to be cut, making the reverberation more
muted in tone.If this “BYPASS” is selected, the high
frequency range will not be cut.
200 (Hz)–8.00 (kHz), BYPASS
OUTPUT Allows you to select a destination for the sound af-
ter reverb has been applied.Selecting LINE outputs
the sound to the OUTPUT jacks on the rear panel;
selecting REV outputs it to Reverb; or selecting
LINE + REV outputs the sound to both the OUT-
PUT jacks and Reverb.
LINE, REV, LINE+REV
DELAY OUTPUT
LEVEL
This adjusts the volume of the delay sound for all
eight parts (the rhythm part and parts 1-7).
0–127
MFX TO DLY LEVEL Applies the Delay equally to each of the parts with
Multi-effects set at ON regardless of the Part Delay
Level for each part.
0–127
* This setting does not have any effect on a part
with the MFX switch turned off (p. 19).
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info