527871
42
Zoom out
Zoom in
Previous page
1/116
Next page
42
Chapter 4. Applying Effects to the Sound (Effects)
Reverb
Reverb is an effect which adds reverberation and ambiance to the sound, creating an impression of spatial depth. It simulates the
sound of music played in a concert hall. This section describes the settings for using the reverb function.
Turning reverb on/off
Reverb is turned on by pressing [REVERB] and confirming that its indicator has lighted. To turn it off, press the button again,
extinguishing the indicator.
* This lets you turn the effect on/off for all parts regardless of other settings.
Adjusting the reverb depth for individual parts
Refer to the explanation of Part Reverb Level in Modifying the settings of each part (p. 19).
Making detailed settings
1. Hold down [REVERB] and press [EDIT].
* If the D-FIELD function ASSIGN 2 is set to “REVERB,” you can also access the setting screen by holding down the D-FIELD function
button [ASSIGN 2] and pressing [EDIT].
2. Press [ENTER] to select a parameter.
3. Turn [VALUE] to modify the setting.
4. When you are finished, press [EXIT]
.
* Parameters with an “X” or “Y” following the value will be selected when using D-FIELD to control the reverb (p. 39). “X” can be controlled by moving
your finger to left and right, and “Y” by moving your finger up and down.
Screen Parameter Explanation Value
TYPE Selecting the type. ROOM1 (reverb with short decay and high density),
ROOM2 (reverb with short decay and low density),
STAGE1 (reverb with much lingering reverberation),
STAGE2 (reverb with strong early reflections),
HALL1 (clear-sounding reverb),
HALL2 (rich-sounding reverb)
TIME Adjusting the length of rever-
beration. You can adjust the
time over which the reverbera-
tion will continue.
0127 X
HF DAMP Specifies the frequency at
which the high frequency por-
tions of the reverberation will
be cut. Lowering this setting
will cause more of the upper
frequency content to be cut,
making the reverberation more
muted.
200 (Hz)8.00 (kHz), BYPASS
* If this “BYPASS” is selected, the high frequency
range will not be cut.
REVERB LEVEL You can adjust the overall vol-
ume of reverb for the eight
parts (rhythm part and parts 1
7).
0127 Y
MFX TO REV LEVEL Specifies the volume of the re-
verb that will be applied to the
Multi-effects sound.
Applies reverb equally to each
of the parts with Multi-effects
set at ON regardless of the Part
Reverb Level for each part.
0127
* This setting does not have any effect on a part with
the MFX switch turned off (p. 19).
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info