527761

Roland CDX-1 Manual

21
Zoom out
Zoom in
Previous page
1/252
Next page
21
Panel Descriptions
Panel Descriptions
Top Panel
INPUT section
fig.14-01e
PEAK indicators
These indicate whether distortion is occurring in the sound
that is being input to the respective input jacks (MIC1, MIC2,
GUITAR/BASS, LINE).
The PEAK indicator will light at a level below clipping level. Adjust
the INPUT SENS knob as high as possible without causing the
PEAK indicator to light when the sound is input.
INPUT SENS knobs
These adjust the input sensitivity of the input jacks (MIC1,
MIC2, GUITAR/BASS, LINE).
INPUT SELECT buttons
Use these buttons to select the input source (input jack) that
you wish to record. The selected button will light. When you
press an INPUT SELECT button that is lit, it will go dark, and
the input sound will be muted (silenced).
•[MIC1]:
Select this when you wish to record the sound of a mic
connected to the MIC1 jack (phone or XLR).
* Do not use identically numbered phone-type and XLR-type MIC jacks
simultaneously.
•[MIC2/Gtr/Bs]:
Select this when you wish to record the sound of a mic
connected to the MIC2 jack or the sound of an instrument
connected to the GUITAR/BASS jack.
* Do not use identically numbered phone-type and XLR-type MIC jacks
simultaneously.
• [LINE]:
Select this when you wish to record the sound of an
instrument or CD player connected to the LINE jacks.
• SIMUL [MIC1]+[MIC2]:
When you wish to record vocal and guitar simultaneously, or
when you wish to record two mics, press [MIC1] and [MIC2]
simultaneously. Both buttons will light, and can be recorded
simultaneously.
* If an instrument and mic are connected to both the GUITAR/BASS jack
and the MIC2 jack, respectively, the input from the GUITAR/BASS jack
will take priority. The input from the mic connected to the MIC2 jack
(phone-type/XLR-type) cannot be recorded.
• [DIGITAL]:
Select this when you wish to record the sound of a CD player
or MD player connected to the COAXIAL IN connector or
OPTICAL IN connector.
When you press [DIGITAL], the connected connector
(COAXIAL IN or OPTICAL IN) will be selected
automatically.
* If digital audio devices are connected only to coaxial connectors, you can
repeatedly press [DIGITAL] to cycle through lit (COAXIAL IN is
selected)
→
blink
→
OFF (mute).
* If digital audio devices are connected to both the optical and coaxial
connectors, the input from the COAXIAL IN will take priority. In this
case, you can repeatedly press [DIGITAL] to cycle through COAXIAL
IN
→
OPTICAL IN
→
OFF (mute).
* Digital audio signals cannot be recorded simply by connecting a digital
audio device to the OPTICAL or COAXIAL connector. If you wish to
recorded digital audio signals, you must change the settings as described
in “In order to make a Digital recording with CD player” (p. 148).
INPUT REC LEVEL knob
This adjusts the volume of the input source or the recording
level of the input source that you are recording.
* If you use the INPUT REC LEVEL knob to turn down the volume of the
input source during recording, the sound will be recorded in the audio
track or pad at a low volume, so that noise will be more apparent when
you raise the volume of the audio track or pad for playback. If you wish to
lower the volume of the input source you are hearing, use the MASTER
fader or the phone knob to lower the volume.
4
1
PEAK indicators
2
INPUT SENS knobs
3
INPUT SELECT button
INPUT REC LEVEL knob
1
2
3
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CDX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CDX-1 in the language / languages: English as an attachment in your email.

The manual is 6,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CDX-1

Roland CDX-1 User Manual - German - 225 pages

Roland CDX-1 User Manual - Dutch - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info