527761
250
Zoom out
Zoom in
Previous page
1/252
Next page
22
Mastering Tools parameter list
COMP (Compressor) *2: Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the compressor effects on/off.
Low Threshold (Low Threshold) -24–0 dB This parameter sets the volume at which the compressor for the low
frequency band starts working.
Mid Threshold (Middle Threshold) -24–0 dB This parameter sets the volume at which the compressor for the middle
frequency band starts working.
Hi Threshold (High Threshold) -24–0 dB This parameter sets the volume at which the compressor for the high
frequency band starts working.
Low Ratio (Low Ratio) 1:1.0–1:16.0, 1:INF This parameter sets the ratio at which the output in the low frequency band
is suppressed when the input level has exceeded the low threshold level.
Mid Ratio (Middle Ratio) 1:1.0–1:16.0, 1:INF
This parameter sets the ratio at which the output in the middle frequency band
is suppressed when the input level has exceeded the middle threshold level.
High Ratio (High Ratio) 1:1.0–1:16.0, 1:INF
This parameter sets the ratio at which the output in the High frequency band is
suppressed when the input level has exceeded the High threshold level.
Low Attack (Low Attack) 0–100 ms
This parameter sets the time until when the low frequency band compressor
starts working after the input level has exceeded the low threshold level.
Mid Attack (Middle Attack) 0–100 ms
This parameter sets the time until when the middle frequency band compressor
starts working after the input level has exceeded the middle threshold level.
High Attack (High Attack) 0–100 ms
This parameter sets the time until when the High frequency band compressor
starts working after the input level has exceeded the High threshold level.
Low Release (Low Release) 50–5000 ms
This parameter sets the time until when the low frequency band compressor
stops working after the input level has dropped below the low threshold level.
Mid Release (Middle Release) 50–5000 ms
This parameter sets the time until when the middle frequency band compressor
stops working after the input level has dropped below the middle threshold level.
High Release (High Release) 50–5000 ms
This parameter sets the time until when the High frequency band compressor
stops working after the input level has dropped below the High threshold level.
MIX (Mixer): Adjust the volume of the low, mid, and high frequency ranges, and mix them.
Low Level (Low Level) -80–+6 dB This parameter sets the volume in the low frequency band after passing
through the expander and compressor.
Mid Level (Middle Level) -80–+6 dB This parameter sets the middle frequency band volume after passing
through the expander and compressor.
High Level (High Level) -80–+6 dB This parameter sets the volume in the High frequency band after passing
through the expander and compressor.
LMT (Limiter): Prevents distortion by suppressing signals at High levels.
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the limiter effects on/off.
Threshold (Threshold) -24–0 dB This parameter sets the volume at which the limiter starts working.
Attack (Attack) 0–100 ms This parameter sets the time until when the limiter starts working after the
input level has exceeded threshold level.
Release (Release) 50–5000 ms This parameter sets the time until when the limiter stops working after the
input level drops below the threshold level.
OUT (Output): Provides settings concerning overall output.
Level (Level) -80– +6 dB This parameter sets the overall volume after passing through the limiter.
Soft Clip (Soft Clip) OFF, ON By turning this ON, suppresses conspicuous distortion that may occur
when the effect of compressor/limiter has been applied excessively.
Dither (Dither) OFF, 8–24 bit This parameter smooths the transition where the sound disappears.
*1 If “Low Type” or “High Type” is set to “SHELV” (Shelving Type), the setting for “Lo Q “or “High Q” is invalid.
*2 With Compressor (COMP), the level is automatically adjusted to the optimal with the settings for “Threshold” and “Ratio”. Setting
“Attack” to a relatively long time may cause distortion. For this reason, a margin of -6 dB is provided. Adjust the Mixer (MIX) level as
required.
250


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CDX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CDX-1 in the language / languages: English as an attachment in your email.

The manual is 6,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CDX-1

Roland CDX-1 User Manual - German - 225 pages

Roland CDX-1 User Manual - Dutch - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info