527405
369
Zoom out
Zoom in
Previous page
1/388
Next page
293
MIDI Implementatie
Bijlagen
LOCATE [MCP]
Format2---LOCATE [TARGET]
Status Data byte Status
F0H 7FH, Dev, 06H, 44H, 06H, 01H, F7H
hrH, mnH, scH, frH, ffH
Byte Remarks
F0H Exclusive status
7FH Universal System Exclusive Realtime Header
Dev Device ID (7FH)
06H MMC command message
44H LOCATE (MCP)
06H Byte count
01H “TARGET” sub-Command
hrH, mnH, scH, frH, ffH
Standard Time Specification with subframes
F7H EOX (End of Exclusive)
* If the efficient Maker of the locate switch is pressed or when moved, the BR-1600CD
transmits this message.
MIDI Time Code Command
Full Message
Basic operation of quarter frame messages will be handled.
Status Data Byte Status
F0H 7FH, Dev, 01H, 01H, hrH, mnH, scH, frH F7H
Byte Remarks
F0H Exclusive status
7FH Realtime Universal System Exclusive Header
Dev Device ID (7FH)
01H sub-ID #1 (MIDI Time code)
01H sub-ID #2 (Full message)
hrH hours and type: 0 yy zzzzz
yy type:
00 = 24 Flame/sec
01 = 25 Flame/sec
10 = 30 Flame/sec (Drop Format)
11 = 30 Flame/sec (Non Drop Format)
zzzzz : Hours (00 - 23)
mnH Minutes (00 - 59)
scH Seconds (00 - 59)
frH Frames (00 - 29)
F7H EOX (End of Exclusive)
* This message is transmitted when the song position moves.
3. Supplementary material
Decimal/Hexadecimal table
(hexadecimal values are indicated by a following “H”)
MIDI uses 7-bit hexadecimal values to indicate data values and the address and size of
exclusive messages. The following table shows the correspondence between decimal and
hexadecimal numbers.
+——————+——————++——————+——————++——————+——————++——————+——————+
| D | H || D | H || D | H || D | H |
+——————+——————++——————+——————++——————+——————++——————+——————+
| 0 | 00H || 32 | 20H || 64 | 40H || 96 | 60H |
| 1 | 01H || 33 | 21H || 65 | 41H || 97 | 61H |
| 2 | 02H || 34 | 22H || 66 | 42H || 98 | 62H |
| 3 | 03H || 35 | 23H || 67 | 43H || 99 | 63H |
| 4 | 04H || 36 | 24H || 68 | 44H || 100 | 64H |
| 5 | 05H || 37 | 25H || 69 | 45H || 101 | 65H |
| 6 | 06H || 38 | 26H || 70 | 46H || 102 | 66H |
| 7 | 07H || 39 | 27H || 71 | 47H || 103 | 67H |
| 8 | 08H || 40 | 28H || 72 | 48H || 104 | 68H |
| 9 | 09H || 41 | 29H || 73 | 49H || 105 | 69H |
| 10 | 0AH || 42 | 2AH || 74 | 4AH || 106 | 6AH |
| 11 | 0BH || 43 | 2BH || 75 | 4BH || 107 | 6BH |
| 12 | 0CH || 44 | 2CH || 76 | 4CH || 108 | 6CH |
| 13 | 0DH || 45 | 2DH || 77 | 4DH || 109 | 6DH |
| 14 | 0EH || 46 | 2EH || 78 | 4EH || 110 | 6EH |
| 15 | 0FH || 47 | 2FH || 79 | 4FH || 111 | 6FH |
| 16 | 10H || 48 | 30H || 80 | 50H || 112 | 70H |
| 17 | 11H || 49 | 31H || 81 | 51H || 113 | 71H |
| 18 | 12H || 50 | 32H || 82 | 52H || 114 | 72H |
| 19 | 13H || 51 | 33H || 83 | 53H || 115 | 73H |
| 20 | 14H || 52 | 34H || 84 | 54H || 116 | 74H |
| 21 | 15H || 53 | 35H || 85 | 55H || 117 | 75H |
| 22 | 16H || 54 | 36H || 86 | 56H || 118 | 76H |
| 23 | 17H || 55 | 37H || 87 | 57H || 119 | 77H |
| 24 | 18H || 56 | 38H || 88 | 58H || 120 | 78H |
| 25 | 19H || 57 | 39H || 89 | 59H || 121 | 79H |
| 26 | 1AH || 58 | 3AH || 90 | 5AH || 122 | 7AH |
| 27 | 1BH || 59 | 3BH || 91 | 5BH || 123 | 7BH |
| 28 | 1CH || 60 | 3CH || 92 | 5CH || 124 | 7CH |
| 29 | 1DH || 61 | 3DH || 93 | 5DH || 125 | 7DH |
| 30 | 1EH || 62 | 3EH || 94 | 5EH || 126 | 7EH |
| 31 | 1FH || 63 | 3FH || 95 | 5FH || 127 | 7FH |
+——————+——————++——————+——————++——————+——————++——————+——————+
D: decimal
H: hexadecimal
Decimal expressions such as used for MIDI channel, Bank Select, and Program Change will
be the value 1 greater than the decimal value given in the above table.
Since each MIDI byte carries 7 significant data bits, each byte can express a maximum of 128
different values. Data for which higher resolution is required must be transmitted using two
or more bytes. For example a value indicated as a two-byte value of aa bb HH would have a
value of aa x 128 + bb.
For a signed number (+/-), 40H = -64, 00H = 0, and 3FH = +63. (i.e., the decimal equivalent
will be 64 less than the decimal value given in the above table.) For a two-byte signed
number, 40 00H = -8192, 00 00H = 0, and 3F 7FH = +8191.
Hexadecimal notation in two 4-bit units is used for data indicated as `nibbled’. The nibbled
two-byte value of 0a 0b H would be a x 16 + b.
<Example1>
What is the decimal equivalent of 5AH?
From the above table, 5AH = 90.
<Example2>
What is the decimal equivalent of the 7-bit hexadecimal values 12 34H?
From the above table, 12H = 18 and 34H = 52
Thus, 18 x 128 + 52 = 2356
<Example3>
What is the decimal equivalent of the nibbled expression 0A 03 09 0DH?
From the above table, 0AH = 10, 03H = 3, 09H = 9, 0DH = 13
Thus, the result is ((10 x 16 + 3) x 16 + 9) x 16 + 13 = 41885
<Example4>
What is the nibbled equivalent of the decimal number 1258?
16 ) 1258
16 ) 78...10
16 ) 4...14
0... 4
From the above table, 0=00H, 4=04H, 14=0EH, 10=0AH
Thus the result is 00 04 0E 0AH
369


Need help? Post your question in this forum.

Forumrules
1

Forum

roland-br-1600-cd

Reset search

  • het lukt me niet om 2 sporen over te zetten (of ineens op te nemen) naar 11/12 13/14 of 15/16
    ik vind er ook niets over terug in de handleiding of op internet. Submitted on 28-7-2023 at 14:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BR-1600 CD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BR-1600 CD in the language / languages: Dutch as an attachment in your email.

The manual is 20,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info