708971
11
Zoom out
Zoom in
Previous page
1/19
Next page
Deutsch
Français Italiano Español PortuguêsEnglish Nederlands
English
Panel Descriptions
9
10 FOOT SWITCH
TIP: CH SELECT RING: DUAL TONE jack
If a footswitch (sold separately: BOSS FS-6, FS-7, or FS-5L) is
connected, you can use it to switch between the CLEAN/CRUNCH
channels, or to turn DUAL TONE (p. 6) on/o.
For detail, refer to “Connecting a Footswitch (FS-6/FS-7/FS-5L)” (p. 10).
TIP: TREMOLO RING: EFX LOOP jack
Artist only
If a footswitch (sold separately: BOSS FS-6, FS-7, or FS-5L) is
connected, you can use it to turn the tremolo eect on/o or to
turn on/o the eect of the unit that’s connected to the eect loop.
For detail, refer to “Connecting a Footswitch (FS-6/FS-7/FS-5L)” (p. 10).
TIP: EFX LOOP A: EFX LOOP B jack
Tour only
If a footswitch (sold separately: BOSS FS-6, FS-7, or FS-5L) is
connected, you can use it to turn on/o the eect of the unit thats
connected to the Eect Loop A/B.
For detail, refer to “Connecting a Footswitch (FS-6/FS-7/FS-5L)” (p. 10).
GA-FC jack
Artist/Tour only
You can connect a separately sold Roland GA-FC and use it to
switch channels or turn DUAL TONE, TREMOLO, and EFX LOOP on/
o (TREMOLO is available on the Blues Cube Artist only).
For detail, refer to ”Connecting a GA Foot Controller (sold
separately: GA-FC)” (p. 10).
11 REC OUT O port
You can use a commercially available USB 2.0 cable to record the
sound of the Blues Cube into your computer.
You must install the USB driver before connecting the unit to
your computer.
Download the USB driver from the Roland website. For details, refer
to Readme.htm which is included in the download.
http: //www.roland.com/support/
12 PHONES jack
Connect headphones here. You can obtain powerful guitar sounds
just as if you were playing through the speaker. To adjust the
volume, use the [VOLUME] knob of the CLEAN channel or the
CRUNCH channel, along with the [MASTER] knob.
* If a plug is inserted in this jack, no sound will be output from
the Blues Cubes own speaker. This is convenient if you don’t
want loud sound to be produced from the speaker, such as
when youre practicing at night.
13 LINE OUT
LINE OUT jack
Connect this to your PA system or recorder. You can obtain powerful
guitar amp sound just as if you were playing through the speaker.
Recorder, etc.
You can use this in conjunction with an external PA system, or to
record your performance via direct line while monitoring the sound
from the Blues Cubes speaker.
Adjust the output level using the [VOLUME] knob of the CLEAN
channel or the CRUNCH channel.
* The Blues Cube Tour is equipped with
balanced (XLR) type jacks. Wiring
diagrams for these jacks are shown
below. Make connections after rst
checking the wiring diagrams of
other equipment you intend to
connect.
* To prevent malfunction and equipment failure, always turn
down the volume, and turn o all the units before making any
connections.
[GND LIFT] switch
Tour only
Loop hum noise may occur when other external devices are
connected to the Blues Cube Tour. In such instances, you may be
able to mitigate the problem by switching the position of the [GND
LIFT] switch. The [GND LIFT] switch should be normally set to OFF.
Switch Description
ON Pin 1 is disconnected from the Blues Cube Tours ground.
OFF Pin 1 connects to the Blues Cube Tours ground.
14 EFX LOOP SEND/RETURN jacks
Artist/Tour only
Connect an external eect device (monaural).
Connect the SEND jack to the input of your external eect device,
and connect the output of your external eect device to the
RETURN jack.
External eects unit
OUTPUTINPUT
*
Artist only
The EFX LOOP of the Blues Cube Artist is a series
loop. If the volume of your external eect device is turned down
or if it is powered-o, there will be no sound.
*
Tour only
On the Blues Cube Tour, you can press the front
panel [EFX LOOP A/EFX LOOP B] buttons simultaneously to
switch between a series loop and a parallel loop (which mixes
the guitar sound of this unit with the sound of your external
eect device).
15 SPEAKER OUT jack
Tour only
Connect a speaker box (separately sold; e.g., the BC-CAB410).
* Only use speaker cable to connect the speaker. Do not use any
shielded cable designed for use with guitars.
[IMP. SELECT] (Impedance Select) switch
Make settings as appropriate for the specications of the speaker
box that you connect. For details, refer to the owner's manual of
your speaker box.
If you connect the BC-CAB410 (separately sold), set this to 4 Ω.
16 MIDI IN jack
Tour only
You can control the Blues Cube Tour from a multi-eect unit or a
MIDI foot controller.
1:GND 2:HOT
3:COLD
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Blues Cube Tour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Blues Cube Tour in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland Blues Cube Tour

Roland Blues Cube Tour User Manual - German - 19 pages

Roland Blues Cube Tour User Manual - Dutch - 19 pages

Roland Blues Cube Tour User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info