708971
9
Zoom out
Zoom in
Previous page
1/19
Next page
Deutsch
Français Italiano Español PortuguêsEnglish Nederlands
English
Panel Descriptions
7
5 EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
MEMO
The Blues Cube Tour provides independent equalizers for the
CLEAN channel and the CRUNCH channel.
6 EFFECT
[TREMOLO] knob
Artist only
Adjusts the depth of the tremolo eect, which cyclically modulates
the volume.
[TAP] button
Artist only
Species the rate of the tremolo eect. When you press the button
twice, the tremolo is set to a rate corresponding to the interval
between presses.
[EFX LOOP] button
Artist only
Switches on/o an external eect that is connected to the EFX
LOOP jacks.
[EFX LOOP A / EFX LOOP B] button
Tour only
Switches on/o an external eect that is connected to the EFX
LOOP A / EFX LOOP B jacks.
[REVERB] knob
Adjusts the reverb depth.
7 MASTER
[PRESENCE] knob
Artist/Tour only
Adds lustrous outline to the mid- and high-frequency range. This is
eective when you want to improve the denition of the sound.
[MASTER] knob
Adjusts the overall volume.
[POWER CONTROL] switch
Lets you switch the output level of the power amp according to
your location or needs. The MAX setting selects the maximum
output for the respective model. This is equivalent to 60 W for the
Blues Cube Stage, 80 W for the Blues Cube Artist, and 100 W for the
Blues Cube Tour.
8 POWER
[POWER] switch
Turns the power of the Blues Cube on/o. When
the power is on, the indicator at the left of this
switch is lit.
Turning the Power On/O
* Once everything is properly connected (p. 6 – p. 9), be sure to
follow the procedure below to turn on their power. If you turn
on equipment in the wrong order, you risk causing malfunction
or equipment failure.
1. Make sure that the Blues Cube’s [MASTER] knob and the
volume of the devices connected to the Blues Cube are set
to 0.
* Before connecting your instrument to the Blues Cube’s INPUT
jack, set the [MASTER] knob to the minimum setting (far left).
2. Turn on the Blues Cube.
* Before turning the unit on/o, always be sure to
turn the volume down. Even with the volume
turned down, you might hear some sound
when switching the unit on/o. However, this is
normal and does not indicate a malfunction.
* This unit is equipped with a protection circuit.
A brief interval (a few seconds) after turning
the unit on is required before it will operate
normally.
3. Turn on the power of the devices connected to the LINE
OUT jack, PHONES jack, and REC OUT O port.
4. Adjust the volume levels for the devices.
Before switching o the power, lower the volume on each of the
devices in your system and then TURN OFF the devices in the
reverse order to which they were switched on.
* If you need to turn o the power completely, rst turn o the
unit, then unplug the power cord from the power outlet. Refer
to To completely turn o power to the unit, pull out the plug
from the outlet” (p. 2).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Blues Cube Tour at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Blues Cube Tour in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland Blues Cube Tour

Roland Blues Cube Tour User Manual - German - 19 pages

Roland Blues Cube Tour User Manual - Dutch - 19 pages

Roland Blues Cube Tour User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info