527390
56
Zoom out
Zoom in
Previous page
1/124
Next page
Die Menu-Parameter
56
r
Backing Module BK-7m
Parameter für “5. GM2Chorus”:
Filter Type OFF, LPF, HPF OFF: Das Filter ist aus-
geschaltet. LPF: Fre-
quenzen oberhalb von
Cutoff werden gefil-
tert. HPF: Frequenzen
unterhalb von Cutoff
werden gefiltert.
Cutoff Freq 200~8000Hz Filter-Frequenz
Pre Delay 0.0~100.0 ms Verzögerung des Ein-
satzes des Chorus-
Effektes
Rate Sync Hz, Note Bestimmt, ob die Mo-
dulations-Geschwin-
digkeit zum Arranger-
oder Recorder Tempo
synchronisiert wird
(“Note”) oder eine feste
Modulations-Frequenz
(“Hz”) besitzt.
Rate Hz 0.05~10.00Hz Bestimmt die Modula-
tions-Geschwindigkeit
bei “Rate Sync=Hz”
bzw. “Rate Sync=note”.
“T” bedeutet “triolisch”.
“.” ist eine punktierte
Note.
“2/1” ist ein Doppel-
takt.
Rate Note 1/64T, 1/64, 1/
32T, 1/32, 1/
16T, 1/32., 1/
16, 1/8T, 1/16.,
1/8, 1/4T, 1/8.,
1/4, 1/2 T, 1/4.,
1/2, 1/1 T, 1/2.,
1/1, 2/1 T, 1/1.,
2/1
Depth 0~127 Stärke der Chorus-
Modulation. Je höher
der Wert, desto stärker
ist die Modulation.
Phase 0~180 deg Spreizung des Effektes
im Stereofeld.
Feedback 0~127 Bestimmt, die stark das
Chorussignal wieder
zurück in den Chorus-
effekt zurück geleitet
wird. Je höher der
Wert, desto stärker ist
dieser Effekt.
Parameter Einstellung Beschreibung
Level 0~127 Lautstärke des Chorus-
signals
Parameter Einstellung Beschreibung
Output Select Main, Rev,
Main+Rev
Main: das Chorussig-
nal wird direkt an den
Ausgang geleitet.
Rev: das Chorussignal
wird an den Reverb-
Effekt geleitet.
Main+Rev: das Chorus-
signal wird in beide
oben beschriebene
Richtungen geleitet.
Pre LPF 0~7 Stärke der Filterung
hoher Frequenzen des
Quellsignals. Je höher
der Wert, desto stärker
werden die hohen Fre-
quenzen gefiltert.
Level 0~127 Lautstärke des Chorus-
Signals.
Feedback 0~127 Bestimmt, die stark das
Chorussignal wieder
zurück in den Chorus-
effekt zurück geleitet
wird.
Delay 0~127 Verzögerung des Cho-
rus-Effektes.
Rate 0~127 Bestimmt die Modula-
tions-Frequenz. Je
höher der Wert, desto
schneller ist die Modu-
lation.
Depth 0~127 Bestimmt die Stärke
der Modulation. Je
höher der Wert, desto
stärker ist die Modula-
tion.
Reverb Send 0~127 Bestimmt den Anteil
des Chorussignals, das
in den Reverb-Proz-
essor geleitet wird.
Bei “127” sind Chorus
und Reverb in Reihe
geschaltet.
Parameter Einstellung Beschreibung
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-7M BACKING MODULE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: German as an attachment in your email.

The manual is 13,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE Additional guide - English - 10 pages

Roland BK-7M BACKING MODULE User Manual - English - 128 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info