527390
54
Zoom out
Zoom in
Previous page
1/124
Next page
Die Menu-Parameter
54
r
Backing Module BK-7m
Tone Part Effects-Parameter
Drücken Sie den [MENU]-Taster, und wählen Sie ‰ “Per-
formance Edit” ‰ “Tone Part Effects”.
1.
Wählen Sie mit dem [CURSOR÷VALUE]-Rad
den gewünschten Effekt-Prozessor aus
(Mfx, Reverb, Chorus).
Die folgenden Parameter stehen zur Verfügung:
a) Mfx-Parameter
Drücken Sie den [MENU]-Taster, und wählen Sie ‰
“Performance Edit” ‰ “Tone Part Effects” ‰ “Mfx”.
Der BK-7m besitzt einen Multieffekt-Prozessor für
alle Echtzeit-Parts gemeinsam (siehe “Mfx” auf S. 51)
sowie 3 Multieffekt-Prozessoren für die Style/Song-
Parts.
Mfx Switch
Schaltet den Mfx-Prozessor ein bzw. aus.
Mfx Type
Folgende Multieffekttypen sind auswählbar:
NOTE
Einige Effekt-Bezeichnungen werden im Display abgekürzt
angezeigt.
Mfx Edit
Wenn Sie die einzelnen Effekt-Parameter verändern
möchten, drücken Sie auf der “Mfx”-Seite das
[CURSOR÷VALUE]-Rad, um die “Mfx Edit”-Seite auf-
zurufen. Sie können dann die Einstellungen mit dem
[CURSOR÷VALUE]-Rad ändern.
Siehe “MFX-Typen und die Effekt-Parameter” auf
S. 105.
Die ersten beiden Parameter bei “Mfx Type” sind
Chorus Send” (0~127) und “Reverb Send” (0~127).
Diese bestimmen, wie viel Chorus bzw. Hall das Mfx-
Signal erhalten soll.
b) Reverb-Parameter
Drücken Sie den [MENU]-Taster, und wählen Sie ‰
“Performance Edit” ‰ “Tone Part Effects” ‰ “Reverb”.
Reverb Switch
Schaltet das Reverb ein (On) bzw. aus (Off).
Reverb Type
Bestimmt den Reverb-Typ. Folgende Einstellungen
stehen zur Verfügung:
Reverb Edit
Wenn Sie die einzelnen Reverb-Parameter verändern
möchten, drücken Sie das [CURSOR÷VALUE]-Rad, um
die “Reverb Edit”-Seite aufzurufen, und verändern Sie
die Einstellungen mit dem [CURSOR÷VALUE]-Rad.
Parameter für die Halltypen “1. SRV Room”, “2. SRV
Hall” und “3. SRV Plate”:
Parameter Einstellung
Mfx Switch Off, On
1. Thru
2. Stereo EQ
3. Overdrive
4. Distortion
5. Phaser
6. Spectrum
7. Enhancer
8. Auto Wah
9. Rotary
10. Compressor
11. Limiter
12. Hexa-Chorus
13. Trem Chorus
14. Space-D
15. St. Chorus
16. St. Flanger
17. Step Flanger
18. St. Delay
19. Mod. Delay
20. 3 Tap Delay
21. 4 Tap Delay
22. Time Delay
23. 2 Pitch Shifter
24. FBK Pitch
25. Reverb
26. Gate Reverb
27. OD‰ Chorus
28. OD‰ Flanger
29. OD‰ Delay
30. DST‰ Chorus
31. DST‰ Flanger
32. DST‰ Delay
33. EH‰ Chorus
34. EH‰ Flanger
35. EH‰ Delay
36. Chorus‰ DLY
37. Flanger‰ DLY
38. CHO‰ Flanger
39. CHO/DLY
40. Flanger/DLY
41. CHO/Flanger
42. Isolator
43. Low Boost
44. Super Filter
45. Step Filter
46. Humanizer
47. Speaker Sim
48. Step Phaser
49. MLT Phaser
50. Inf Phaser
51. Ring Modul
52. Step Ring
53. Tremolo
54. Auto Pan
55. Step Pan
56. Slicer
57. VK Rotary
58. 3D Chorus
59. 3D Flanger
60. 3D Step Flgr
61. Band Chorus
62. Band Flanger
63. Band Step Flg
64. VS Overdrive
65. VS Distortion
66. GT Amp Simul
67. Gate
68. Long Delay
69. Serial Delay
70. MLT Tap DLY
71. Reverse DLY
72. Shuffle DLY
73. 3D Delay
74. Long Time DLY
75. Tape Echo
76. LoFi Noise
77. LoFi Comp
78. LoFi Radio
79. Telephone
80. Phonograph
81. Step Pitch
82. Sympa Reso
83. Vib-Od-Rotary
84. Center Canc
Parameter Einstellung
Reverb Switch Off, On
Parameter Einstellung Beschreibung
Level 0~127 Lautstärke des Hallef-
fektes
Pre Delay 0.0~100.0 ms Verzögerung des Ein-
satzes des Halleffektes
Time 0~127 Länge der Hallfahne
Size 1~8 Größe dees Hallraumes
High Cut 160~12500Hz,
Bypass
Frequenz, oberhalb der
die hohen Frequenzen
innerhalb des Hallsig-
nals gefiltert werden.
Bei BYPASS werden
keine hohen Frequen-
zen gefiltert.
Density 0~127 Dichte der Hall-Relek-
tionen
1. SRV Room
2. SRV Hall
3. SRV Plate
4. GM2 Reverb
5. Room1
6. Room2
7. Stage1
8. Stage2
9. Hall1
10. Hall2
11. Delay
12. Pan Delay
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-7M BACKING MODULE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: German as an attachment in your email.

The manual is 13,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE Additional guide - English - 10 pages

Roland BK-7M BACKING MODULE User Manual - English - 128 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info