Manual Roland BK-7M BACKING MODULE (page 58 of 128) (English)

527390

Zoom out

Zoom in

1/128

Menu options

Backing Module BK-7m

Parameters for the “6. Delay” type:

Pre LPF 0~7 Cuts the high fre-

quency range of the

sound coming into the

chorus. Higher values

will cut more of the

high frequencies.

Level 0~127 Output level of the

chorus signal.

Feedback 0~127 Adjusts the amount of

the chorus sound that

is fed back into the

effect.

Delay 0~127 Adjusts the delay time

from the direct sound

until the chorus sound

is heard.

Rate 0~127 This parameter sets the

speed (frequency) at

which the chorus

sound is modulated.

Higher values result in

faster modulation.

Depth 0~127 This parameter sets the

depth at which the

chorus sound is modu-

lated. Higher values

result in a more pro-

nounced modulation.

Reverb Send 0~127 This parameter sets the

amount of chorus

sound that is sent to

the Reverb processor.

The value “127” effec-

tively allows you to

connect the chorus and

reverb effects in series

(Chorus before Reverb).

If you do not want the

chorus signal to be

processed by the

Reverb effect, set this

value to “0”.

Parameter Setting Explanation

Level 0~127 Output level of the

chorus signal.

Parameter Setting Explanation

Output Select Main, Rev,

Main+Rev

Allows you to specify

where the processor’s

output signal should

go: to the OUTPUT

sockets (“Main”), the

Reverb processor

(“Rev”) or both

(“Main+Rev”). The lat-

ter two options mean

that the chorus signal

is also processed by the

reverb effect you

select.

L Delay Sync msec, Note Use this parameter to

specify whether

(“Note”) or not (“msec”)

the delay time should

be synchronized to the

tempo. Depending on

your choice, the set-

ting range of the fol-

lowing parameter

refers to a time (msec)

or a note value.

L Delay msec 0~1000ms Specifies the delay

time. This can be either

a time value (“msec”)

or a note value,

depending on how you

set the “Delay Sync”

parameter above. “T”

means “triplet” and a

“.” refers to a dotted

note. “2/1” means that

each repetition comes

after two measures/

bars. The advantage of

working with a note

value is that the delay

effect always runs in

sync with the current

tempo.

L Delay Note 1/64T, 1/64,

1/32T, 1/32,

1/16T, 1/32.,

1/16, 1/8T,

1/16., 1/8,

1/4T, 1/8., 1/4,

1/2T, 1/4., 1/2,

1/1T, 1/2., 1/1,

2/1T, 1/1., 2/1

L Level 0~127 Volume of each delay

line (there are three –

left, center and right).

HF Damp 200~8000Hz,

Bypass

Adjusts the frequency

above which sound fed

back to the effect will

be cut. If you do not

want to cut the high

frequencies, set this

parameter to BYPASS.

C Delay Sync See “L Delay Sync”

C Delay msec See “L Delay msec”

C Delay Note See “L Delay Note”

C Level See “L Level”

Parameter Setting Explanation

BK-7m_UK.book Page 58 Tuesday, January 4, 2011 9:25 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE Additional guide - English - 10 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - German - 124 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland BK-7M BACKING MODULE Manual

Product: