Manual Roland BK-7M BACKING MODULE (page 56 of 128) (English)

527390

Zoom out

Zoom in

1/128

Menu options

Backing Module BK-7m

Parameters for the “4. GM2Reverb” type:

Parameters for the “5. Room1”~“12. Pan Delay”

types:

c) Chorus parameters

This function group can be selected using [MENU]

button ‰ “Performance Edit” ‰ “Tone Part Effects” ‰

“Chorus”.

Reverb switch

Select “Off” you don’t need any chorus effect.

Chorus Type

This parameter allows you to select one of the twelve

effects types, one of which is actually a delay effect.

Chorus Edit

If you also want to edit the parameters of the

selected effect type, press the [CURSOR÷VALUE] dial

to jump to the “Chorus Edit” page. You can then use

the [CURSOR÷VALUE] dial to edit the available param-

eters.

Parameters for the “1. Chorus1”~“4. Flanger” types:

Diffusion 0~127 Adjusts the change in

density of the reverb

over time. The higher

the value, the more the

density increases with

time. (The effect of this

parameter is most

noticeable with long

reverb times.)

LF Damp Freq 50~4000Hz Adjusts the frequency

below which the low-

frequency content of

the reverb sound will

be reduced.

LF Damp Gain –36~0dB Adjusts the amount of

damping applied to the

frequency range

selected with “LF

Damp”. With a setting

of “0”, there will be no

reduction of the

reverb’s low-fre-

quency content.

HF Damp Freq 4000~

12500Hz

Adjusts the frequency

above which the high-

frequency content of

the reverb sound will

be reduced.

HF Damp Gain -36~0dB Adjusts the amount of

damping applied to the

frequency range

selected with “HF

Damp”. With a setting

of “0”, there will be no

reduction of the

reverb’s high-fre-

quency content.

Parameter Setting Explanation

Level 0~127 Main Output level of

the reverb signal.

Character Room1,

Room2,

Room3, Hall1,

Hall2, Plate,

Delay, Pan

Delay

Type of reverb

Pre LPF 0~7 Cuts the high fre-

quency range of the

sound coming into the

reverb. Higher values

will cut more of the

high frequencies.

Level 0~127 Output level of the

reverb signal.

Parameter Setting Explanation

Time 0~127 Time length of rever-

beration.

Feedback 0~127 Adjusts the level of the

delay sound that is fed

back into the effect

when the “Character”

setting is “Delay” or

“Pan Delay”.

Parameter Setting Explanation

Level 0~127 Output level of the

reverb signal.

Time 0~127 Time length of rever-

beration

HF Damp 200~8000Hz,

Bypass

Adjusts the frequency

above which the high-

frequency content of

the reverb sound will

be cut. If you do not

want to cut the high

frequencies, set this

parameter to BYPASS.

Feedback 0~127 Adjusts the amount of

delay feedback.

Parameter Setting

Chorus Switch Off, On

Parameter Setting Explanation

Level 0~127 Output level of the

reverb signal.

Parameter Setting Explanation

1. Chorus1

2. Chorus2

3. Chorus3

4. Flanger

5. GM2Chorus

6. Delay

BK-7m_UK.book Page 56 Tuesday, January 4, 2011 9:25 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE Additional guide - English - 10 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - German - 124 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland BK-7M BACKING MODULE Manual

Product: