708951
114
Zoom out
Zoom in
Previous page
1/160
Next page
Menu options
114
r
Backing Keyboard BK-5
Rhythm Volume Rx
Allows you to enable or disable the reception of vol-
ume messages relating the rhythm.
Rhythm Pc Rx
This parameter allows you to enable or disable the
reception of program change and bank select mes-
sages for rhythm selection.
NTA
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “NTA”.
NTA notes are only received (from an external MIDI
instrument). What you play in the chord recognition
area of the keyboard to feed the Arranger is auto-
matically converted to the corresponding MIDI note
numbers, so that all rhythm parts transmit their
notes to external instruments. There is thus no need
to transmit the note messages of what you play in
the chord recognition area (NTA) separately.
These parameters allow you to specify on which MIDI
channels the BK-5 should receive chord information
used to change the rhythm’s key in real-time.
Channel
Allows you to select the MIDI channel on which the
BK-5 should receive NTA messages.
Rx
This parameter allows you to specify whether (“On”)
or not (“Off”) the selected MIDI channel should be
used to receive chord information.
Rx Octave
Use this parameter to transpose the notes received
on the selected MIDI channel (“Ch”) in steps of one
octave.
Rx Global Limit Low/High
These parameters allow you to set the note range to
be received. If not all note messages of the selected
MIDI channel should be received by the NTA “part”,
set the range to the desired values.
NOTE
The “Limit Low” value cannot be higher than the “Limit
High” value (and vice versa).
Parameters
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “Parameters”.
This page contains several parameters that are not
related to one another (the other MIDI pages always
concentrate on one aspect).
Part Switch
This parameter allows you to specify whether or not a
muted part should go on sending MIDI messages:
Internal: A muted part can no longer be played via
the BK-5’s keyboard or Arranger/song player but con-
tinues to send MIDI messages. Selecting “Internal”
and muting a part thus has the same effect as select-
ing “Local Off” (see p. 108).
Int+MIDI: A muted part can no longer be played via
the BK-5’s keyboard or Arranger/song player and no
longer sends MIDI messages.
Tx Velocity
Your BK-5 is equipped with a velocity-sensitive key-
board and a tone generator capable of responding to
velocity messages. Use this parameter to switch the
transmission (TX) of velocity messages on or off.
Parameter Setting
Rhythm Volume Rx Off, On
Parameter Setting
Rhythm Pc Rx Off, On
Parameter Setting
Channel Ch1~Ch16
Parameter Setting
Rx Off, On
Parameter Setting
Rx Octave –4~0~4
Parameter Setting
Rx Global Limit Low C–~G9
Rx Global Limit High C–~G9
Parameter Setting
Part Switch Internal, Int+MIDI
BK-5_US.book Page 114 Thursday, May 23, 2013 7:01 PM
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-5 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-5

Roland BK-5 Additional guide - English - 6 pages

Roland BK-5 User Manual - German - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info