708951
112
Zoom out
Zoom in
Previous page
1/160
Next page
Menu options
112
r
Backing Keyboard BK-5
Sync
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “Sync”.
The “Sync” parameters allow you to specify whether
or not the BK-5 should send MIDI real-time messages
when you start rhythm or song playback. This allows
you to synchronize external instruments or (soft-
ware) sequencers with your BK-5.
Rhythm Start/Stop Tx
If you activate this option, the BK-5 sends start or
stop messages when you start (or stop) rhythm play-
back.
Rhythm Clock Tx
If you activate this option the rhythm playback sends
MIDI Clock messages.
SMF Start/Stop Tx
Similar to “Rhythm Start/Stop Tx” but for songs.
SMF Clock Tx
Similar to “Rhythm Clock Tx” but for songs.
SMF Position Tx
If you switch this parameter on, the song playback
sends Song Position Pointer (SPP) messages that
indicate the current playback position.
Sync Rx
This parameter is used to specify whether rhythm
and song playback should be synchronized by an
external MIDI device.
Mode
Internal: Song or rhythm playback uses BK-5 inter-
nal tempo.
Auto: A good setting for remote control of song or
rhythm playback (using a PK-series dynamic MIDI
pedal board, for example). If the BK-5 receives a MIDI
Start message (FA), it waits for Clock messages that
specify the tempo. If those Clock messages are not
received, the BK-5 starts playback using its internal
tempo. If, however, Clock messages (F8) follow after
the Start message, the BK-5 uses the external tempo.
MIDI: Song or rhythm playback can be started or
stopped with MIDI real-time messages (Start, Stop,
Clock) received from an external clock source.
Remote: Song or rhythm playback waits for a start
message to start playback at its own tempo. When it
receives a stop message, playback stops. External
clock messages are ignored.
Basic
The following parameters are located on the display
page that can be selected using [MENU] button‰
“MIDI” ‰ “Edit System” ‰ “Basic”.
The Basic channel is used to receive and transmit
Program Change and Bank Select messages for
selecting Performances, as well as for the reception
and transmission of other kinds of messages that are
not directly related to a specific MIDI channel.
NOTE
If you select another channel, messages intended for the
Basic parameters might also cause other parameters to
change when you don’t want them to.
The following parameters are available here:
Tx
Switches the transmission of MIDI messages on the
Basic channel on or off.
Tx Channel
The channel used to transmit MIDI messages.
Parameter Setting
Rhythm Start/Stop Tx Off, On
Parameter Setting
Rhythm Clock Tx Off, On
Parameter Setting
SMF Start/Stop Tx Off, On
Parameter Setting
SMF Clock Tx Off, On
Parameter Setting
SMF Position Tx Off, On
Parameter Setting
Sync Rx Off, On
Parameter Setting
Mode Internal, Auto, MIDI, Remote
Parameter Setting
Tx Off, On
Parameter Setting
Tx Channel 1~16
BK-5_US.book Page 112 Thursday, May 23, 2013 7:01 PM
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-5 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-5

Roland BK-5 Additional guide - English - 6 pages

Roland BK-5 User Manual - German - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info