708898
8
Zoom out
Zoom in
Previous page
1/22
Next page
Turning the AX-Edge On
1.
Power-on the equipment in the order of AX-Edge
0
connected devices.
* In order to protect its circuitry, the AX-Edge waits for a while after
being powered-on before it begins operating.
2.
Switch on power to the connected equipment, and raise
the volume to an appropriate level.
* The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto Off
function).
If you do not want the power to be turned off automatically, disengage the
Auto Off function.
&
“Making the Power Automatically Turn Off After a Time (Auto Off)”
(p. 8)
5
Unsaved data is lost when the power turns off. Before turning the
power off, save the data that you want to keep.
5
To restore power, turn the power on again.
Turning Off the Power
1.
Power-off the equipment in the order of the connected
devices
0
AX-Edge.
Adjusting the Overall Volume
(Master Volume)
Adjusts the overall volume.
1.
Adjust the [MASTER VOLUME] knob located in the neck
control section.
Making the Power Automatically
Turn Off After a Time (Auto Off)
1.
Press the [MENU/WRITE] button.
2.
Use the cursor [
K
] [
J
] buttons to select “SYSTEM, and
then press the [ENTER] button.
3.
Use the cursor [
K
] [
J
] buttons to select Auto Off, and use
the [–] [+] buttons to change the setting.
If you don’t want the unit to turn off automatically, choose OFF”
setting.
Parameter
Cursor [K] [J]
Value
[–] [+]
Auto Off
OFF, 30min, 240min
4.
To save the setting, hold down the [SHIFT] button and
press the [MENU/WRITE] button.
A confirmation message appears.
Write System ?
[Exit]:N [Ent]:Y
* Save the system settings while the system setting screen is displayed.
You can’t write the system settings unless youre in the system setting
screen.
5.
To execute, press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
Replacing the Blade Panel
The AX-Edge comes with one replacement blade panel.
Blade panel
1.
Use the included hex key to remove the screws.
2.
Exchange the blade panel.
3.
Attach the screws.
NOTE
Tightening the screws excessively could damage the panel or the AX-
Edge itself. Take care not to tighten the screws excessively.
Panel Descriptions
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AX-Edge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AX-Edge in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AX-Edge

Roland AX-Edge User Manual - German - 22 pages

Roland AX-Edge User Manual - Dutch - 22 pages

Roland AX-Edge User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info