708898
7
Zoom out
Zoom in
Previous page
1/22
Next page
Connecting External Equipment
Connecting to an amp or mixer
The AX-Edge does not have an internal amp or speakers. In order
to produce sound, you’ll need to connect it to an audio device
such as a keyboard amp, monitor speakers, or a stereo set, or use
headphones.
1.
Connect the rear panel OUTPUT jacks to the input jacks of
your external device.
Amp or mixer
Make connections using a 1/4” unbalanced (mono) cable. Use a
cable that has the appropriate type of plug for connecting to the
input jack of your device.
* If youre using a mono audio device, connect the cable to the L/MONO
OUTPUT jack.
If you’re using headphones, connect them to the PHONES jack. In
this case theres no need to connect any other audio device.
Connecting via a wireless system to an amp, etc.
If you use a commercially available wireless system and operate
the AX-Edge on batteries, you’ll be able to perform while moving
around on stage free of any cables.
* Be sure to use a wireless transmitter that complies with the wireless
regulations that are applicable in your area.
1.
Connect the wireless transmitter to the rear panel
OUTPUT jacks.
Wireless transmitters
* The shape of the connector depends on the wireless transmitter that
youre using.
* If the amp that you’re using has only a mono channel, connect only one
transmitter to the L/MONO jack of the AX-Edge.
2.
Connect the audio output of the wireless receiver to your
mixer or amp.
Controlling a MIDI sound module
1.
Connect the AX-Edge’s MIDI OUT connector to the MIDI IN
connector of the sound module or synthesizer that you
want to control.
MIDI OUT
MIDI IN
AX-Edge (transmits MIDI messages)
Module, synthesizer, etc.
(receives MIDI messages)
* As needed, connect the sound module or synthesizer to your amp or
speaker. For details, refer to the owner’s manual of the sound module
or synthesizer that you’re using.
Controlling the AX-Edge from an external MIDI device
The AX-Edge can receive MIDI messages and produce sound using
the program that’s selected on its sound generator.
1.
Connect the MIDI OUT connector of your controlling
device to the AX-Edge’s MIDI IN connector.
MIDI IN
MIDI OUT
AX-Edge (receives MIDI messages)
Synthesizer, stage piano, etc.
(transmits MIDI messages)
MEMO
To specify the MIDI transmit/receive channels, edit the system
parameters Basic Channel and Program Control Channel. If youre
using the master keyboard function, edit the program parameters to
specify the MIDI transmit channel of each part.
For details, refer to “Parameter Guide (PDF).
Connecting a computer or sequencer
If you want to connect the AX-Edge to a computer in which you’ve
installed sequencer software or a software sound module, and
use the AX-Edge as a master keyboard to record or perform, make
connections as follows.
USB port
AX-Edge (records and transmits MIDI messages)
USB port
Computer or sequencer
(records and transmits MIDI
messages)
7
Owner’s Manual
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AX-Edge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AX-Edge in the language / languages: English as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AX-Edge

Roland AX-Edge User Manual - German - 22 pages

Roland AX-Edge User Manual - Dutch - 22 pages

Roland AX-Edge User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info