708884
219
Zoom out
Zoom in
Previous page
1/270
Next page
218
Error Message
Error Message
Meanings
Copy Protected.
Can’t Save
To protect the copyright, this music file cannot be saved as SMF format.
When you want to save as Atelier format, you can save only original disk.
Can’t Save
This Song.
You can only play the music data. It cannot be saved on a floppy disk or internal memory.
Write Protected
Disk
The protect tab on the floppy disk is set to the Protect position.
Change it to the Write position and repeat the procedure.
Master Disk
This floppy disk cannot store the format or save any data. Insert a different disk and repeat
the procedure.
Read Only Song.
Can’t Save
A new song cannot be saved onto this floppy disk.
No Disk
No floppy disk is connected to the disk drive. Insert the disk correctly, and repeat the
procedure.
Disk Full
There is not sufficient space left on the floppy disk for the data to be saved. Save the data
onto a different floppy disk or delete music data on the disk.
Unknown Disk
The floppy disk inserted into the disk drive cannot be read.
Please format the floppy disk.
Disk Ejected
The floppy disk was removed from the disk drive while loading or writing was in progress.
Insert the floppy disk and repeat the procedure.
Damaged Disk
This floppy disk is damaged and cannot be used. Insert a different disk and repeat the
procedure.
Can’t Read
This song cannnot be read.
Can’t Play
It cannot be read the floppy disk quickly enough. Press the [Reset] button, then press the
[Play/Stop] button to play the song.
Memory Full
The Rhythm data is excessively large, and cannot be loaded.
The performance data is excessively large, and cannot be loaded.
Since the internal memory is full, recording or editing is not possible.
MIDI Buffer Full
The AT-80SL/60SL cannot deal with the excessive MIDI data sent from the external MIDI
device. Reduce the amount of MIDI data sent to the AT-80SL/60SL.
Communication
Error
A MIDI cable or computer cable has been disconnected. Connect it properly and sucurely.
Computer I/F
Error
The Computer Switch is set to a wrong position or the computer is set wrongly. Switch off
the AT-80SL/60SL then set the Computer Switch to the correct position and set the
computer correctly. After that, switch on the AT-80SL/60SL again.
Memory Error
There is something wrong with the system. Repeat the procedure from the beginning.
Expansion Board
Not Found.
An error with the instrument. Please contact Roland Service.
AT-80SL_60SL_e.book 218 ページ 2004年3月23日 火曜日 午前9時34分
219


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-60SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-60SL in the language / languages: English as an attachment in your email.

The manual is 13,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-60SL

Roland AT-60SL User Manual - German - 266 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info