708884
218
Zoom out
Zoom in
Previous page
1/270
Next page
217
Troubleshooting
The Bass Range Sounds Odd,
or There Is a Vibrating
Resonance.
Playing at loud volumes may cause
instruments near the AT-80SL/60SL
to resonate. Resonance can also
occur with fluorescent light tubes,
glass doors, and other objects. In
particular, this problem occurs more
easily when the bass component is
increased, and when the sound is
played at higher volumes.
Use the following measures to
suppress such resonance.
Place speakers so they are 10-15
cm from walls and other surfaces.
Reduce the volume.
Move the speakers away from any
resonating objects.
- - -
When listening through
headphones:
Here, a different cause (such as
resonance produced by the AT-
80SL/60SL) would be suspect.
Consult your Roland dealer or
nearest Roland Service Center.
- - -
The volume level of the
instrument connected to AT-
80SL/60SL is too low.
Could you be using a connection
cable that contains a resistor?
Use a connection cable that does not
contain a resistor.
p. 205
Pressing the expression
pedal while playing back
Atelier performance data
produces a crackling noise
The expression pedal function is set
to “PEDAL+COMPOSER” during
playback of Atelier performance
data.
When this setting is used, moving
the expression pedal while playing
back Atelier performance data may
create a difference between the
expression pedal information in the
performance data and the volume as
set with the expression pedal, which
can result in this kind of sound being
produced.
Set the expression pedal function to
“PEDAL” during playback.
p. 187
Tempo not changing even
when the source tempo is
reselected (when arranging
rhythms using the Rhythm
Customize function).
Auto Std Tempo (Auto Standard
Tempo) is set to on.
When the Auto Std Tempo setting is
set to ON and rhythms are switched
while the rhythm is stopped, the
tempo is automatically set to the
tempo for that rhythm.
The tempo setting does not change
automatically, even if the rhythms
are switched with the Auto Std
Tempo setting set to OFF and the
rhythm stopped.
Turn “Auto Std Tempo” off.
p. 189
Unable to save created
rhythm to the User Memory
“Memory Full” appears in the
display.
The available memory remaining in
the AT-80SL/60SL is not sufficient.
First delete some other rhythm
saved to the user memory, then save
the rhythm you have created to the
user memory once again.
p. 182
p. 183
There is no sound from the
twelve keys at the right of the
lower keyboard.
The V-LINK function is set Mode 2.
When V-LINK setting is Mode 2, the
group of twelve keys starting at the
very right of the lower keyboard are
used for controlling video images.
Therefore, no sounds are played
even when you press these keys.
Turn the V-LINK function off, or
select Mode 1 for the V-LINK
function.
p. 201
Problem Check Solution Page
AT-80SL_60SL_e.book 217 ページ 2004年3月23日 火曜日 午前9時34分
218


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-60SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-60SL in the language / languages: English as an attachment in your email.

The manual is 13,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-60SL

Roland AT-60SL User Manual - German - 266 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info