527352
118
Zoom out
Zoom in
Previous page
1/132
Next page
118
Troubleshooting
Problems with playback functions
Problem Cause Action Page
Moving your hand over the D Beam
controller does not produce a sound
If a D Beam button is lit in red, moving your hand
above the D Beam controller will apply an eect to
the sound you play from the keyboard.
Press the D Beam button once again so the button
is lit in green.
p. 44
Damper Pedal does not operate
The damper pedal aects only the Lower
keyboard. The damper pedal does not aect the
Upper Keyboards and Bass pedalboard.
This is not a malfunction. - - -
The damper pedal does not aect the Solo voice. This is not a malfunction. - - -
Expression Pedal does not operate
The function of the Expression Pedal during
recording or the function during playback has
been set to “COMPOSER.
Set the expression pedal function during record-
ing to “PEDAL, and during playback to “PEDAL or
“PEDAL+COMPOSER.
p. 94
Can’t use the function assigned to the foot
switch
If “Registration Shift” (change Registrations)
is “RIGHT, “LEFT, or “RIGHT + Load Next, the
foot switch will be dedicated to switching the
Registration.
Turn “Registration Shift” o. p. 96
Problems with the audio les
Problem Cause Action Page
Can’t play an audio le
Is the audio le in a format supported by the
ATELIER?
To be playable, audio les must be in the following
format.
• File name extension is .wav
• 16-bit linear sampling
• Sampling rate is 44.1 kHz
This is not a malfunction. - - -
Can’t record along with an audio le/
Can’t copy an audio le to internal memory
The ATELIER does not allow recording using audio
les, and cannot be used to copy audio les into
internal memory.
This is not a malfunction. - - -
Other problems
Problem Cause Action Page
Can’t read/write USB memory
Could you be using USB memory not made by
Roland?
We cannot guarantee operation if you’re using
USB memory not made by Roland.
- - -
The USB memory setting is incorrect. Change the USB Memory setting. p. 104
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-350C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-350C in the language / languages: English as an attachment in your email.

The manual is 57,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-350C

Roland AT-350C User Manual - German - 128 pages

Roland AT-350C User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info