527352
116
Zoom out
Zoom in
Previous page
1/132
Next page
116
Troubleshooting
Problems with the sound
Problem Cause Action Page
When the human voice Jazz Scat” is
selected, playing dynamics do not change
the sound
The setting of “Initial Touch” is turned OFF. Turn “Initial Touch” on. p. 92
Rotary eect is not be applied
Some sounds do not allow the rotary eect to be
applied.
This is not a malfunction. - - -
Overdrive eect is not be applied
Some sounds do not allow the overdrive eect to
be applied.
This is not a malfunction. - - -
When you release your ngers from keys
in the Lower keyboard, the notes continue
sounding
The Easy One Finger is at ON.
Press the Pedal [To Lower] button to turn it o
(dark).
p. 51
Even though you press only one key, a
multiple number of notes sound
Harmony Intelligence is at ON. Turn “Harmony Intelligence” o. p. 38
Chord Intelligence is turned ON. Turn “Chord Intelligence” o. p. 95
Pitch is o
Transpose is in eect.
Simultaneously press the Transpose [-] [+] buttons
to cancel the transposition (the Transpose [-] [+]
buttons’ indicators will go out).
p. 36
The tuning is incorrect. Adjust the standard pitch. p. 106
While set for an octave shift, you are playing keys
beyond the recommended range. This does not
indicate a malfunction.
Adjust the Octave Shift setting. p. 37
Sound is distorted / cracked
The Part Balance volume of each part is too high. Press the Part Balance button to lower the volume. p. 35
The Reverb volume has been raised when the
volume of each Part Balance button is already
raised.
Either lower the Reverb volume, or adjust the Part
Balance of each part.
p. 35
p. 41
The [Master Volume] slider has been used to raise
the overall volume excessively.
Use the [Master Volume] slider to lower the overall
volume.
p. 22
Some keys (of certain keyboard parts)
sound strange
You are playing notes outside the recommended
range of the voice.
This is not a malfunction. - - -
Bass is heard even though you are not
playing the Bass Pedalboard
The Pedal [To Lower] button or the “Bass Split
function is on.
When the Pedal [To Lower] button is on, the Bass
will be sounded by the Lower keyboard.
In the Pedal part, press the Pedal [To Lower]
button or “Bass Split” function is o.
p. 51
p. 48
When playing the same sound in the Upper
keyboard and Lower keyboard, the volume
is dierent
On one of the keyboards, “Initial Touch” is turned
ON.
Set the initial touch settings of the Upper
keyboard and the Lower keyboard to both On, or
both O.
p. 92
The sound is not played correctly
If you layer the same type of sound (for example,
Strings 1 and Strings 5), or play an octave-shifted
organ sound, the timing at which you play a note
or the phase relationship between the two sounds
may aect the way in which the sounds are heard,
but this is not a malfunction.
Alternatively, you are playing an organ sound with
Octave Shift.
You are layering sounds of the same type (e.g.,
Strings 1 and Strings 5).
This is not a malfunction.
- - -
Pressing the expression pedal while playing
back ATELIER performance data produces a
crackling noise
The expression pedal function is set to
“PEDAL+COMPOSER” during playback of ATELIER
performance data.
When this setting is used, moving the expression
pedal while playing back ATELIER performance
data may create a dierence between the
expression pedal information in the performance
data and the volume as set with the expression
pedal, which can result in this kind of sound being
produced.
Set the expression pedal function to “PEDAL
during playback.
p. 94
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-350C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-350C in the language / languages: English as an attachment in your email.

The manual is 57,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-350C

Roland AT-350C User Manual - German - 128 pages

Roland AT-350C User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info