Take out the filter and use a cleaning brush to clean the dust. It
canbe washed with water. If necessary, the filter can be replaced.
It is recommended to replace the filter element every 3 months to
ensure a better cleaning effect;
Step 4: Cleaning the rear filter
Take out the rear filter and use the cleaning brush to clean
the suspended dust in an up and down motion. Do not wash
with water. You can replace the rear filter if necessary. It is
recommended to clean it every 6 months and once every year for a
better cleaning effect.
10
CAUTION
Roller Brush Replacement
Step 1: Removing the roller brush
;
Step 2: Rolling brush cleaning
Roller brush release button
Place the electric brush with the reverse side facing up, turn the roller
brush release button, and remove the roller brush fixing block;
take out the roller brush and clean the surface attachments;
Use the cleaning brush to pick up and cut out the hair and fibers
attached to the roller brush to separate it from the roller brush.
1. Do not use force when cleaning the dust and dirt from the filter case, so as not to damage the metal mesh;
2. Please leave the filter and filter case to naturally air-dry after washing to prevent corrosion and rust;
3. When replacing the filter, please use the original dust cup filter provided by the manufacturer to avoid damaging the vacuum cleaner if it is not compatible;
4. Only use the cleaning brush provided by the manufacturer to clean the dust cup filter, do not use steel brushes or tough brushes;
5. When cleaning the rear filter, please clean in the direction of the filter strip, do not clean in other directions, so as not to damage the rear filter;
6. Do not wash the rear filter.
1.To replace the roller brush, please turn off the power and unplug the adapter;
2.The cleaning brush has a sharp blade, which is used to cut the windings and tangled up fiber that are difficult to clean. Please do not allow children to
touch the cleaning brush;
3.Do not lose the roller brush fixing block, and do not use the electric floor brush without the roller brush fixing block installed.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roidmi X300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roidmi X300 in the language / languages: English as an attachment in your email.
The manual is 6.39 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.