Decreased cleaning abilityThe dust box is full, please clean the dust box; the filter is blocked, please clean the filter; the roller brush is entangled with
wedged objects, please clean the roller brush
Whether it consumes electricity directly at the base stationWhen the machine is always in the base station, the battery consumption is low, which helps to keep the battery at its best
performance
There is no water in the cleaning plate but the pump
is still workingNeed to clean and wipe the water level contacts
When the robot is performing network configuration,
the base station network configuration status light is
blinking (>3 minutes)
a. Restart the robot and configure the network app; b. Check whether the SN of the robot cleaner and the base station are the
same. If they are inconsistent, you need to manually modify the base station SN to be consistent with the robot cleaner’s SN
through the APP; c.None of the above can solve the problem, please contact the after-sales service for repair.
Timed cleaning does not take effectTimed cleaning will start when the remaining power charge is more than 15%
17
Dust Collection TimeAbout 12 seconds
Clean Water TankAbout 4LWaste Water TankAbout 4L
Product WeightAbout 9.8kg
Rated Input
24V1.2A
Rated Output
Dust Bag CapacityAbout 3L
Noise<86dB（A）
Cleaning Power40W
Product Size400 × 382 × 465mm
Product NameBase StationJCZ06RMProduct Model
Basic Specifications
Product Name
Operating Voltage
Battery Capacity5200mAh
Product Weight
Charging Time
Dust Box Volume
About 250 minutes
About 4.2kg
About 220ml
14.8V
SDJ06RM
Charging limit Voltage
Interval Between Backwashing Mop
24V1.2A
Product Model
Noise
Rated Power
Product Size
<77dB（A）
6min. 9min. 12min 3 gears are available (APP → more Multi → base station settings → backwash frequency, adjustable frequency)
48W
330 × 330× 106mm
Can not return return to the base station after partial
cleaning or moving location
Insufficient battery during cleaning, recharge but not
continued
Please make sure that the host is not in the Do Not Disturb mode, it will not continue scanning in this mode; manual recharging
or putting the robot cleaner back to the base station will not continue scanning
Missing sweep of robot cleanerThe wall sensor or the anti-fall sensor is dirty, it is recommended to wipe it with a soft dry cloth
The robot will regenerate the map after area cleaning or long-distance movement. If the base station is far away, it may not
be able to automatically recharge. Please manually put the robot back to the base station to charge
Do you need to charge for sixteen hours for the first three usesLithium battery has no memory effect when used, no need to wait when it is fully charged
Self-Cleaning and Emptying Robot Vacuum
EN
Battery Typelithium battery
220-240 V~, 50-60 Hz
Charging PowerDust Collection Power850W30W
Base Station Network Standby Power Consumption:1.68W; (Robot Vacuum+Base Station) Network Standby Power Consumption:0.90W; Enter network standby time:5min
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roidmi Eva at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roidmi Eva in the language / languages: English as an attachment in your email.
The manual is 15.61 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
