814976
9
Zoom out
Zoom in
Previous page
1/16
Next page
ROE DEER - Stove Instructions
7
WARNING
During the first few times the stove is used, the heat resistant paint will be curing and
may give off small amounts of smoke and odours. This is completely normal for this type
of appliance and we recommend that you light a small fire for the first few days of use
to cure the paint and allow the castings to relax, not fired vigorously.
You may hear your stove produce clicking or ticking noises whilst it heats up or cools
down. This is completely normal and is produced by the expansion and contraction of
the steel components in your stove when its temperature changes.
3.3. Fuel
Wood
Any type of wood is suitable (though hardwood is preferable) provided it is well
seasoned and has a moisture content below 20%. Typically this means wood which
has been cut and stored in an open dry shelter for between one and two years. We
recommend that for general burning, wood should be split into logs of no more than
100mm (4 inches) diameter.
DO NOT BURN wet or unseasoned wood, painted, impregnated / treated wood,
manufactured board products or pallet wood. Doing so will result in the wood burning
inefficiently and excess smoke, soot or tar will be produced. This will coat and damage
the internal components of the stove and flue and could result in a chimney fire. If,
when burning wood, you see signs of sticky tar inside the appliance or chimney, your
wood is ‘green’ or too wet and requires further seasoning.
DO NOT BURN: bituminous coal, any petroleum based products or any liquid fuels.
DO NOT BURN Any form of plastics in this appliance.
3.4. Before Lighting
If using for the first time or following a long period out of use check that the flue is
clear and unobstructed. Check that the ash pan is empty and in position.
BDS Stoves are designed to be operated with the fire door(s) closed at all times, apart
from refuelling (when alight) or cleaning (when cold).
Prior to lighting the stove for the first time, please check that Installation and all
building work is complete, Building Regulations and any local by-laws have been
followed during installation, Carbon Monoxide detector is correctly installed in the
same room as the appliance, Suitable provision for combustion and ventilation air,
depending upon building regulations have been undertaken. Ensure that you have
read and understood these instructions before lighting the fire.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roe Deer New York Vision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roe Deer New York Vision in the language / languages: English as an attachment in your email.

The manual is 1.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info