814976

Roe Deer New York Vision Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
ROE DEER - Stove Instructions
2. INSTALLATION OF THE STOVE
2.2. Regulations
All national and local regulations need to be complied with when installing the stove.
2.3. Installation
The stove must be installed by a registered installer or approved by your local building
control officer.
2.4. Safety Clearances
The stove must be installed on a solid, level non‐combustible hearth and with a gap of
at least 600mm from any combustible material such as beams or skirting.
When installing a stove, hearths should have a sufficiently flat surface to allow a firm
seating surface for the stove body to be positioned during its installation. The applian-
ce should be sited in a properly constructed brick fireplace or recess allowing a gap of
100mm all round, at the rear and both sides.
IMPORTANT: INSTALLATION MUST COMPLY WITH CURRENT BUILDING REGULA-
TIONS ENSURE THAT SUFFICIENT CLEARANCES ARE PROVIDED BETWEEN THE
FLUE PIPE AND ANY COMBUSTIBLE MATERIALS IN THE FIREPLACE IN ACCORDAN-
CE WITH THE RULES IN FORCE.
2.5. Floor
National and local building regulations must be complied with when considering the
floor where the stove is to be installed.
The stove should be installed on a non-combustible surface not less than 12mm thick
(conforming to Building Regulations unless otherwise specified) of suitable load
bearing capacity and heat resistance.
The hearth should be level and the appliance fitted at right angles to it. The hearth has
to be able to support the weight of the appliance and any flue bearing down upon it.
The clearance distances to combustible material beneath, surrounding or upon the
hearth and walls adjacent to the hearth should comply with Building Regulations rules
in force.
5
PLEASE READ THESE INSCTRUCTIONS CAREFULLY
For your safety it is very important that your stove is correctly installed.
Our stoves cannot accept any responsibility for any fault arising through the
incorrectly practiced installations or use.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roe Deer New York Vision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roe Deer New York Vision in the language / languages: English as an attachment in your email.

The manual is 1.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info