Manual Rodek ri 4100 (page 31 of 40) (English, German)

168160

Zoom out

Zoom in

1/40

5.1 SELECTING THE OPERATION MODE

The RODEK amplifiers feature an active crossover section with

full versatility and thus, offer different amplification modes,

which can be set by the operation mode slide switch(es). The

operation mode switch enables you to configure each stereo

channel pair to work in either Fullrange, Highpass or even Low-

pass mode. Therefore - before you get started with the settings

of crossover frequencies and input gain adjustments - you must

select the appropriate operation mode for each channel pair,

depending on the speaker system that is connected and driven

by the amplifier. This will make sure that every speaker system is

only working in its proper frequency operation range, for which

the speaker was designed. For example select HIGHPASS, if the

speaker is a component- or coaxial type, or LOWPASS in case

of a subwoofer system – and finally FULLRANGE if the pass

band frequency of the stereo channel is already controlled by

a head-unit with an integrated DSP based active crossover.

5. CROSSOVER SETTINGS

RI-Amp 1-2-4-CH Manual_D+E.indd 31 05.01.2008 12:33:13 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rodek ri 4100 in the language / languages: English, German as an attachment in your email.

The manual is 5,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rodek ri 4100 Manual

Product: