537227
18
Zoom out
Zoom in
Previous page
1/54
Next page
8
Robomow RS models
2.1.2 Laying the Perimeter Wire
The Perimeter Wire is secured to the ground by the
pegs supplied with Robomow. Insert pegs every few
meters and at corners.
At this early stage set a minimum number of pegs. Later,
after testing the wire setup, you will insert all necessary pegs.
After uncoiling Sections of wire, before inserting pegs, use the
RoboRuler to determine the distance of the wire from lawn
edge or obstacles.
RoboRuler is supplied with Robomow
If the edge is slopping (max 15% is allowed) or a wall
the distance from the edge is 40 cm (1.3 ft.).
If the edge is a flat area or a cliff
the distance from the edge is 32 cm (1 ft.).
If there is a hard obstacle (that does not need protection as a
Perimeter Island) near the perimeter– Perimeter Wire should be at least
1 m (3.3 ft.) away from it.
If the edge is not a wall, a fence or other obstacle -
you may move the Perimeter Wire closer to the edge.
Test this short distance before fastening the pegs into the ground.
Maintain a 45º angle in all left-turn corners when laying the wire along
the perimeter. It is not necessary to maintain 45º angle on right-turn
corners along the perimeter. It is not necessary to maintain 45º angle
along corners of an island inside the lawn (example: around a swimming
pool).
Continue laying the wire, according to your plan.
Gradually pull the wire out of its dispenser and lay it loosely as you are
moving in a Anti Clockwise direction.
2.2 Special cases of Perimeter Wire setup
2.2.1 Perimeter Islands
Continue uncoiling the wire, moving from the edge towards the
protected object.
Peg the Perimeter Wire around the protected object in a Clockwise
direction.
90
O
45
O
45
O
90
O
45
O
90
O
Wall Edge 40cm (15.5”)
Lawn Edge 32cm (12.5”)
Narrow Pass 14cm (5.5”)
for RS models
Wall Edge 40cm (15.5”)
Lawn Edge 32cm (12.5”)
Narrow Pass 14cm (5.5”)
for RS models
32 cm (1 ft.)
Area outside perimeter – same basic level and
free of protected objects.
Area outside perimeter – has a wall as an
protected objects.
Min. distance between islands: 1.5 m (4.9 ft.).
Otherwise, demarcate jointly as one island.
Perimeter Wire position
2 wires under
same peg
Perimeter
Wire
Direction of setup: Clockwise around obstacle
40 cm (1.3 ft.)
40 cm (1.3 ft.)
Wire
Slopping -
max 15%.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RS612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RS612 in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RS612

Robomow RS612 User Manual - German - 54 pages

Robomow RS612 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info