512474
17
Zoom out
Zoom in
Previous page
1/44
Next page
17
Figure 1.19
Perimeter Switch
Operating Panel
Flashing light
indicates the s
y
stem
Indicates poor splicing of
perimeter wires or perimeter
wire, which is too long
Indicates a
disconnected/broken
ON
button
Take the Perimeter Switch and squeeze the tabs on
both sides of the Perimeter Switch, (as shown in
figure 1.18a) and remove the back cover from the
Perimeter Switch.
Connect the power supply plug to the Perimeter
Switch board (see figure 1.18b) and reassemble the
Perimeter Switch.
Connect the power supply to a regular household
receptacle 230/120 Volts AC;
The Power Supply is for indoor use only, thus place
it in a dry location, which is well ventilated (do not
cover it with plastic bag); be sure the power supply
and the connection to the low voltage cable are in a
dry place and not exposed to water and rain.
Press the ‘ON’ button. A small flashing green light next to the ‘ON button indicates that the system is
on and functioning properly. The Perimeter Switch also has indicators for a disconnected/broken
perimeter wire and for
poor wire splicing. Figure 1.19
The Perimeter Switch has an automatic shutoff feature, eliminating the need for you to turn it off after
each use. It will shut itself off after 12 hours of operation. You may manually turn the perimeter switch
off by pressing the ‘ON’ button continuously for 3 seconds. A beep will be heard after the three
seconds, indicating you may release the button and the switch is off.
1.4 Robomow Preparation and Settings
1.4.1 Setting the Cutting Height
Lift the Bumper Cover from the front side of the Robomow (figure 1.20).
To change the cutting height, rotate the cutting height adjustment knob (see figure 1.21).
Figure 1.18b
Connect the power supply plug
to the Perim
eter Switch board
Figure 1.20 -
Lifting the Bumper Cover
Figure 1.21 -
RM200 General View
Cutting height
adjustment
knob
Mowing
motor
Carrying
handle
Power Supply
connection
Fuse locationControl Panel
Figure
1.18a
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RM200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RM200 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RM200

Robomow RM200 User Manual - German - 44 pages

Robomow RM200 User Manual - Dutch - 44 pages

Robomow RM200 User Manual - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info