664048
15
Zoom out
Zoom in
Previous page
1/58
Next page
14
3.3 Select Power Box Locaon
Consider the following in order to select the Power Box
location:
 The Power Box will be connected to the Base
Station using the 15m (50ft.) Extension Cable.
 Select a suitable location for the Power Box to be
mounted on a wall near a power outlet.
 Locate it outside the lawn perimeter.
 Select an easily accessed spot.
 Select a dry and sheltered location.
 The Power Box is to be mounted vertically.
The Power Box is suitable for Outdoor use. Yet, it should be placed in a sheltered, dry
and well ventilated spot. The Power Box should not be exposed to direct sunlight or rain.
3.4 Planning the Perimeter Wire Layout
3.4.1
Objects inside
lawn
 Objectssuchasowerbeds,ponds,orsmalltreescan
be protected by creating “Perimeter Islands”, which
are demarcated areas of the lawn, where Robomow
should not enter.
 In the areas where obstacles are grouped closely
together, they should be demarcated by a single,
continuous Perimeter Island.
 Obstacles that are vertical, relatively rigid, and higher
than 15 cm (6 inches), such as trees, phone or power
poles, do not need Perimeter Island. Robomow will
turn when it collides with these obstacles.
3.4.2
Slopes
Slope on the perimeter
 The Perimeter Wire can be laid across a slope
that slants less than 10% (10cm rise per 1m).
CAUTION! If the Perimeter Wire is laid across
a slope steeper than 10%, there is a risk that
the mower will slip and cross outside the wire,
especially when the grass is wet’.
However, if there is a barrier (e.g. fence or wall)
that can protect the mower from slipping off, the
Perimeter Wire can be set on that slope.
15m (50ft) Extension
Cable (low voltage)
PowerBoxxedto
the wall
Perimeter Slope
Max. 10%
15


Need help? Post your question in this forum.

Forumrules
1

Forum

robomow-rc308-pro

Reset search

  • I have used my mower twice on manual recently with no problems. However I have set it up for Automatic and it is reading PAUS. In the manual it advises me to use the Automatic Operation On/of on my remote control, however I was never supplied with a remote control. Could you advise me how to override the PAUS button on my mower display panel. As I have been unable to contact your agent at present, I would appreciate your help. Thank you. Hedley Best. Submitted on 18-4-2020 at 15:33

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC308 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC308 Pro in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC308 Pro

Robomow RC308 Pro Quick start guide - English - 4 pages

Robomow RC308 Pro User Manual - German - 58 pages

Robomow RC308 Pro User Manual - Dutch - 58 pages

Robomow RC308 Pro User Manual - French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info