Manual Robomow RC308 Pro (page 14 of 58) (English)

664048

Zoom out

Zoom in

1/58

There are two options to set the Base Station:

3.2.2 Internal Setup (on the lawn perimeter)

• Choose a place along the Perimeter Wire where

you want to place the Base Station, based on the

onditions detailed in paragraph 3.2.1.

• Place the Base Station in the direction shown in the

guretotheright.

3.2.3 External Setup (off the lawn perimeter):

Scan the code to watch the

video on how to install an

external base.

There are two types of External Setup:

At a corner

In this type of setup, the Base Station is located at one

of the cornersofthelawn,asshowninthegureatthe

right.

• Choose a corner where you want to place the Base

Station outside of the lawn area.

• Place the Base Station, where its front side is touching

the lawn edge or placed somewhere on the lawn.

• Continue to lay the perimeter wire as shown in the

gureontheright,whereitcontinuesatleast10cm

(4”) beyond the Base Station and turns back towards

the lawn at a distance of 10cm (4”) from the other

wire.

• The Base Station may be placed in a small shift to the

right, in order to allow smooth entry of the mower to

the Base Station.

• Later you will have the opportunity to adjust the Base

Stationpositiontoconrmsmoothentry.

Outside the lawn

• Choose a place outside the lawn where you want Robomow to dock and charge.

• Conrmthepathbetweenthelawnandtheoutside

area is smooth with no height difference, so

Robomow will not get stuck and will follow the wire

smoothly.

• The surface between the lawn and the Base Station

should be hard (such as a sidewalk or rigid ground)

and not sandy or stony, so Robomow will not slip or

get stuck on it.

• The area between the lawn and the Base Station

should be clear of obstacles and objects.

• Laythewireasshownintheguretotheright:

- Narrow path of 50cm (20”) width.

- Square Perimeter Island of 30cm (12”) edges.

- Island starts 50cm from the Perimeter Wire.

- Keep a distance of 10cm (4”) between Perimeter

Wire and the Island from both sides.

- The front of the Base Station should be placed a minimum distance of 1.8m (6 ft.) from the Perimeter Wire and

NOT more than 4m (13 ft.).

Min. 10cm (4”)

10cm (4”)

Main Zone

5-4cm

Min. 10cm (4”)

10cm (4”)

Perimeter Island

30cm

50cm (20”)

Min 1.8m (6ft)

Max 4m (13ft)

5-4cm

50cm (20”)

I have used my mower twice on manual recently with no problems. However I have set it up for Automatic and it is reading PAUS. In the manual it advises me to use the Automatic Operation On/of on my remote control, however I was never supplied with a remote control. Could you advise me how to override the PAUS button on my mower display panel. As I have been unable to contact your agent at present, I would appreciate your help. Thank you. Hedley Best. Submitted on 18-4-2020 at 15:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC308 Pro in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC308 Pro

Robomow RC308 Pro Quick start guide - English - 4 pages

Robomow RC308 Pro User Manual - German - 58 pages

Robomow RC308 Pro User Manual - Dutch - 58 pages

Robomow RC308 Pro User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robomow RC308 Pro Manual

Product: