644650
7
Zoom out
Zoom in
Previous page
1/58
Next page
6
1.4 Robomow Safety Features
1.
Child Lock
The Child Lock prevents unintended operation of Robomow
®
by an accidental press of one of the buttons. Only
pressing two buttons in the right order will initiate the operation.
2.
Anti-Theft / Disabling Device
The Anti-Theft / Disabling Device system function will prevent anyone from using or driving the Robomow
®
unless they
have the valid code to enter. You will be prompted to enter a four digit code of your choice to use as your personal
security code.
3.
Lift Sensor
In case the mower is raised from the ground during blade operation, the blade will stop rotating immediately.
4.
Tilt Sensor
In case the mower is tilted up towards a vertical position, the blade will stop immediately.
5.
Obstruction Sensor
Robomow detects interfering obstacles in its way during operation. When the mower collides with an obstacle, the
mower will stop the rotation of the blade immediately, will stop movement in that direction and reverse itself away from
the obstacle.
6.
Emergency Stop Button
Pressing the STOP button at any time during operation will stop the mower and the blade immediately.
7.
Safety Switch
Switching off the Safety Switch will prevent any operation of Robomow
®
. It is required to switch it off before lifting
Robomow
®
and before any maintenance is done.
8.
Sealed Batteries
The batteries that operate Robomow
®
are completely sealed and will not leak any type of uids, regardless of its
position.
9.
Base Station / Perimeter Switch and Perimeter Wire
Robomow
®
cannot operate without a Perimeter Wire installed and activated through the Base Station / Perimeter
Switch. In the event the Perimeter Switch is turned off or otherwise fails to function, Robomow
®
will stop operating.
7


Need help? Post your question in this forum.

Forumrules
1

Forum

robomow-rc304---2016

Reset search

  • After putting my fully charged Robomow rc304 in it's base station after the winter, both lights are flashing on the power box. The battery icon is now red. I have checked all the connections. Turned it off then on after 10 seconds. No change, lights still flashing, no beeping. Submitted on 20-3-2020 at 19:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC304 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC304 - 2016 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC304 - 2016

Robomow RC304 - 2016 Quick start guide - English - 4 pages

Robomow RC304 - 2016 User Manual - German - 62 pages

Robomow RC304 - 2016 User Manual - Dutch - 62 pages

Robomow RC304 - 2016 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info