644650

Robomow RC304 - 2016 Manual

6
Zoom out
Zoom in
Previous page
1/58
Next page
5
EN
Transportation –
To safely move from or within the working area:
1.
Press the STOP button to stop Robomow
®
.
2.
Use the Remote Control (available as an accessory) to drive it from one place to another.
3.
In case of different ground height level, switch off the Safety Switch, and carry the mower
by its carrying handle.
IMPORTANT! It is recommended to keep the original packaging for shipping purposes..
4.
When transporting Robomow
®
over long distances switch off the Safety Switch.
IMPORTANT! After turning on the Safety Switch, always re-set the current day and
time, otherwise unexpected operation of the Robomow may occur.
Using Remote Control (Manual Mowing)
1.
Mow only in daylight or in a good articial light and avoid operating on wet grass.
2.
Do not operate Robomow
®
when barefoot or wearing open sandals. Always wear substantial footwear and
long trousers; always make sure of your footing on slopes.
3.
Use extreme caution when reversing direction the mower towards you.
4.
Always switch on the motor according to instructions while standing away from the blade.
5.
Do not mow manually in slope greater than 15 degrees or where a rm footing is not possible.
Maintenance and Special Instructions–
1.
Always switch off the Safety Switch of Robomow
®
before clearing blockage/ checking/ cleaning/ working on
Robomow
®
or replacing the blade. Never attempt to service or adjust the mower while it is in operation.
2.
In case of abnormal vibrations, stop the mower, switch off the Safety Switch and check for any damage of the
blade. Replace worn or damaged blade to preserve balance. If vibration continues, call for service.
3.
Use heavy gloves when inspecting or servicing the blade.
4.
Do not perform maintenance when barefoot or wearing open sandals. Always wear suitable work shoes and long
trousers;
5.
Replace worn or damaged parts for your safety.
6.
Use only original equipment and accessories. It is not permitted to modify the original design of Robomow
®
. All
modications are made at your own risk.
7.
Maintenance/ Servicing / Cleaning of Robomow
®
should be according to manufacturer’s instructions.
8.
Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
9.
Warning! When there is a risk of a lightning storm, disconnect the Perimeter Wire from the Base Station / Perimeter
Switch, and the Power Box 230V/120V plug from the power outlet.
Batteries –
1.
Do not open or damage the battery pack.
2.
The battery pack should be replaced only by a service dealer.
3.
The Battery Pack contains electrolytes. In case of an electrolyte leakage from the battery pack, the following
actions should be taken:
- Skin contact: Wash the contact areas off immediately with water and soap.
- Eye contact: Flush the eyes with plenty of clean water for at least 15 minutes immediately, without rubbing.
- Get medical treatment.
4.
Ensure that the battery pack is charged using the correct charger recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
Product End of Use -
1.
Robomow and its accessories should be collected separately at the end of their life to prevent waste electrical and
electronic equipment from ending up in landll sites, to promote the reuse, treatment and recovery of electrical and
electronic equipment with the purpose to preserve, protect and improve the quality of the environment, protect human
health and utilize natural resources prudently and rationally.
2.
Do not dispose of Robomow or any other part of it (including the Power Box, Base Station and Perimeter Switch) as
unsorted municipal waste – it should be collected separately.
3.
Ask your local distributor/dealer about return and collection systems availablity.
4.
Do not dispose the battery pack in a re, and do not place used batteries in your household trash.
5.
The battery must be collected, recycled, or disposed of in an environmentally sound manner.
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

robomow-rc304---2016

Reset search

  • After putting my fully charged Robomow rc304 in it's base station after the winter, both lights are flashing on the power box. The battery icon is now red. I have checked all the connections. Turned it off then on after 10 seconds. No change, lights still flashing, no beeping. Submitted on 20-3-2020 at 19:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RC304 - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RC304 - 2016 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RC304 - 2016

Robomow RC304 - 2016 Quick start guide - English - 4 pages

Robomow RC304 - 2016 User Manual - German - 62 pages

Robomow RC304 - 2016 User Manual - Dutch - 62 pages

Robomow RC304 - 2016 User Manual - French - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info