Manual Robomow MC800 - 2016 (page 35 of 58) (English)

644654

Zoom out

Zoom in

1/58

6.4 Menu Opons

There are several levels of menu options that can be set in your Robomow:

A. Basic Settings

B. Advanced Settings

C. Robomow App Settings

6.4.1 Basic Settings

The Basic Settings are the most common menu options changed by the user. Each of the Basic Settings has an

icon on the mower (refer to 6.2 – Operating Panel) that is lit to indicate the selected menu option.

o To change Basic Settings, press the ‘Settings’ button.

o Every press on the Setting button will move between the following 4 menu options:

6.4.1.1 Day and Time – Set the current Day and Time.

Press the ‘Settings’ button so the ‘Day and Time’ (Clock) icon is constantly lit.

‘Day’ is blinking  Scroll to the required day and press OK to conrm;

‘Hours’ is blinking  Scroll to the required hour and press OK to conrm;

‘Minutes’ is blinking  Scroll to the required min and press OK to conrm;

Note! If the mower is switched off and then back on, the ‘Day’ and ‘Time’ will start blinking to indicate

that the day and the time should be re-set.

6.4.1.2 Mowing Hours (%) – increase/decrease the number of mowing hours (in %) needed to cover the lawn

size.

Press the ‘Settings’ button twice until the ‘Mowing Hours (%)’ LED is constantly lit.

Use the scrolling arrows to adjust the number of mowing hours (in %) and press OK to conrm;

The default value of this setting is 100% and it can be changed from 50% to 150%.

Example: a value of 120%, means that Robomow will run 20% more hours on the lawn.

6.4.1.3 Inactive Time – Set times when the mower will be inactive. Inactive operating times can be set for

specic day(s) of the week, and for specic hours for all days in the week.

Inactive Day(s) denes the day(s) when the mower will be inactive (Default: Sunday).

Inactive Hours dene the hours when Robomow will not mow and stays in the Base Station (Default:

23:00-06:00)

IMPORTANT! It is required to go through the entire Inactive Days and Hours sequence in order to save

the settings. Pressing STOP before completing the whole sequence will not save the settings.

To change the Inactive Time, it is required to perform the following steps:

• Press the ‘Settings’ button 3 times until the ‘Inactive Time’ icon is constantly lit.

• The current Inactive Day(s) will constantly lit.

• Press the OK button; ‘Mon’ will start blinking.

- Press the RIGHT arrow to scroll to the day you want to set.

- Press ‘OK’ to toggle between ‘Active’ and ‘Inactive’ options for that day:

The LED is lit – ‘Inactive Day’ (mower will stay in the Base Station all day).

The LED is off – available day for mowing.

Press the RIGHT arrow to scroll to the next day you want to set

• Scroll through all the days to the right until the ‘Inactive Hours’ will start blinking.

• First set the time, at which the Inactive Hours start and press ‘OK’. Then set the time at which the

Inactive Hours will end.

• Robomow will not operate during the Inactive Hours throughout all days of the week.

• If too many days/hours have been deactivated relative to the zone area, then ‘E8’ (Decrease Inactive

Time) will be displayed – you need to decrease the number of inactive time so that the mower will

have enough time to mow your lawn.

• To set the ‘Inactive Hours’ to ‘Off’ set the same time for the start and the end (i.e.: 00:00 to 00:00).

• Only one window of Inactive Hours can be set in the Basic Settings. To open an additional window of

Inactive Hours use the Robomow App.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Robomow MC800 - 2016 in the language / languages: English as an attachment in your email.

The manual is 5,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow MC800 - 2016

Robomow MC800 - 2016 Quick start guide - English - 4 pages

Robomow MC800 - 2016 User Manual - German - 62 pages

Robomow MC800 - 2016 User Manual - Dutch - 62 pages

Robomow MC800 - 2016 User Manual - French - 62 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Robomow MC800 - 2016 Manual

Product: