Manual Roblin SL 955 (page 9 of 28) (English, German, Dutch, French, Italian, Spanish)

490322

Zoom out

Zoom in

1/28

Part 1 - INSTALLATION INSTRUCTIONS

the blower grid, position the hood in the opening and fix the bottom portion using the

screws in the bag of fittings provided.

3.2 - Fitting the spacer

After having fixed the hood to the overhead unit, the spacer provided can be fitted to

the bottom, to close the space remaining between the rear edge of the hood and the

wall. The spacer can be adjusted from a minimum of 1 mm to a maximum of 30 mm.

3.3 - Connecting up remote blower or filter system

1 - Connecting up remote blower system

The hood must be connected to the external air outlet using Ø 120 mm rigid or

flexible pipes, fixed using suitable hose clamps (not provided). Check whether or not

there are active carbon filters inside the body of the hood; in the remote blower

version they should not be fitted (see paragraph 3.3 part 2).

2 - Connecting up filter system

The hood must be connected to the top portion of the overhead unit using a Ø 120

mm rigid or flexible pipe. Check that the active carbon filters are fitted inside the

body of the hood (see paragraph 3.3. part 2). The filtered air is returned to the

environment through the opening at the top of the overhead unit. If provided, a Ø

120 mm directional vent can be installed on top of the overhead unit, making sure

that the air flow is not directed against the wall.

3.4 - Connecting to the power supply and testing

Connection to the power supply is as follows:

1 - If the hood is equipped with a plug, this can be connected directly to a near-by power

socket, provided the latter is adequately earthed.

2 - If the hood does not have a plug, it must be connected by means of a special power

line, which must be suitably earthed. The warnings given in points 2.3, 2.4 and 2.5 of

the safety precautions must always be observed.

3 - After connecting to the mains power supply, check that the lighting, motor start-up

and speed change all operate correctly.

After installing the hood, the pull-out undercarriage must be opened with a

certain force, until a click is heard indicating that it has reached its full

extension.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roblin SL 955 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roblin SL 955 Manual

Product: