490293

Roblin Latitude Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
EN
1
1
5
• FITTING THE HOOD
4)Fix the chimney bracket item D and the hood bracket item B
on the wall Fig. 5.
3) Fitting the telescopic pins (Fig. 8):
a) When fixing the telescopic pins to a plasterboard
ceiling ensure it is reinforced as illustrated in Fig. 3
and attach using 2 Ø10mm nuts and bolts ensuring
the bolts as sleeved between the plasterboard and
the joist supports to prevent the ceiling being damaged
when the bolts are tightened up. If the ceiling is
concrete, use Ø 10 mm steel rawl bolts or anchors plugs
with external threads (Not provided). Plastic rawl plugs
must not be used.
b) Screw the nuts onto the Ø 10 mm rod exceeding the
ceiling, the welding washers upon as illustrated Fig. 4a.
c) Slide the tubes item O around the tubes with the rod
(Fig. 4b).
d) Unscrew the lock nuts (Fig 4c) and expand the rods
to the require length.
e) Place the second washers, screw the upper tubes onto
the Ø 10 mm rod exceeding the ceiling and then tighten
the upper tubes giving a quarter turn by hand. Adjust the
lenght of the rods ensuring the canopy aligns horizontally
and vertically with the cooking appliance Fig. 4e and then
tighten the lock nuts with moderation.
5) Hook and place the hood under the pins item O for hanging the
canopy to the ceiling .
Attention: 3 persons are necessary to secure this operation.
The bracket D of the chimney is not a carrying element, only
the 2 telescopic pins and the bracket B.
6) Fix the telescopic pins to the corners of the canopy with
the washer 5 holes with the 4 screws as illustrated Fig. 4f.
7) Finish by expanding the upper tubes slightly around the
rods to the bottom Fig. 4g.
8)Check the vertical and parallelism of the chimney and the
canopy. Accessories hook onto the cup screws item T can
be adjusted horizontally and vertically by turning the
adjustment screws V1 and V2.
Fig. 4a
Fig. 4b
Fig 4c
E
C
H
EL L
E
1 /
2
Fig. 4e
Fig. 4f.
Fig. 4g
C
G
F
B
E
10
10
Fig. 5
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roblin Latitude at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roblin Latitude in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info