625559
27
Zoom out
Zoom in
Previous page
1/46
Next page
26 V0913 NX SERIES
English
Tilting, rise and fall of the saw blade
1 By turning the hand wheel, the saw blade can be raised or lowered above or beneath the saw
table.
2 For tilting the saw blade, put the crank handle as shown in the figure.
Fig.9 bis
Saw guide (g. 10)
1 The saw guide is mounted on the cross-cut fence by means of 2 quick release handles (3).
2 This saw guide can be moved along the scale bar and can be secured by pushing the locking
handle (2) down.
3 The saw guide has T-grooves on 2 sides, which allows a high or low position.
4 Adjust the height of the saw blade, in accordance with the thickness of the piece.
5 If possible, mount the guide, according to the height of the piece, vertically or horizontally and
pull it back to the height of the riving knife.
6 Lock the guide with the handles (3)
7 The wanted cut can be read of the scale bar
8 For small cuts and cuts with tilted saw blade, the saw guide can be tilted to the low position thus
avoiding sawing the saw guide, when making thin cuts.
WARNING:
for narrow cuts along the saw fence always use a push stick!
Fig.10
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland NXTZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland NXTZ in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland NXTZ

Robland NXTZ User Manual - German - 100 pages

Robland NXTZ User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info