625546
27
Zoom out
Zoom in
Previous page
1/98
Next page
26 V0212 HX SERIES
English
Deutsch
Working with the optional ring guard fence (g. 22)
Attention: The use of a ring guard fence, for tools with a max. diameter of 150 mm, is optional.
Description: Ring guard fence with diameter 30 mm.
Fig.22
1 Body ring guard fence
2 Guiding template
3 Wood guide
4 Wood pusher protection
5 Adjustment knob
6 Fastener
7 Dust outlet
8 Locking knob
Assembly
The ring guard fence is xed in the 2 holes in the spindle table. Make sure the positioning pin is xed
tightly in the borehole of the table.
Adjustments
Adjust the guiding templates (2) in height in relation to the position of the tool and thickness of the
work piece. Fix with the Allen key.
Adjust the wood pusher (4) protection in height in relation to the thickness of the wood (a slight
pressure of the pusher on the wood is needed) Fix with Allen key.
Horizontally: for maximum protection and in relation to the tool diameter; x with the two screws.
After checking the protraction diameter of the tool, adjust the chip removal precisely by means
of the handle (5) at the back of the fence support. Turning the handle anticlockwise for bigger
reduction and lock with the handle on the support.
Function:
Normally the work piece is machined with the tool underneath the guiding template. Before starting,
check that the work piece travel will not be blocked by any handle. The wood is guided along the
straight part of the template. The cutting depth is progressive; with a maximum on the index of the
template (hat index is visible through the horizontal pusher. The wood guide, connected to the fence,
replaces the template when calibrating with a bearing. The operator is obliged to use this guide which
is delivered with the fence. It is thus advisable to adjust the wood pusher height using as a guide and
to put it as far to the front as possible.
1
7
3
2
6
1
8
4
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robland HX310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robland HX310 in the language / languages: English, German as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robland HX310

Robland HX310 User Manual - Dutch - 48 pages

Robland HX310 User Manual - Dutch, French - 102 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info