520094
36
Zoom out
Zoom in
Previous page
1/105
Next page
Linkage Menu
FX-40
36
16. LINKAGE MENUS
The table below shows a summary of the Linkage menu func-
tions, which are described individually in the next section. In
these menus you can set and stor
e the linkage settings for
individual models or model memories, under individual model
names.
Sound and picture files are only linked to the model memories;
they are not stored in them. If a model file is to be used in anot-
her transmitter, the sound and picture files must also be
copied at the same time
Servo Monitor = Servo travel display
Model Select
= Model memory select
Model T
ype = Model type select
Picture = Picture link
Sound = Speech output link
Frequency = Frequency / modulation select
Function = Transmitter control select / sequence
Sub - Trim = Servo centre adjust
Servo Reverse = Servo direction reverse
Fail Safe = Radio link failure position
End-Point (ATV) = Servo travel adjust
Throttle Cut = Motor cut function
Idle Down = Second idle position
Swashplate = ------------------------->
Timer = Timer settings
Dial Monitor = Display of trimmer / adjustor positions
Data Reset = Data reset
NOTE:
The “Helicopter” model type with electronic swashplate
mixing (HR3, H4 etc.) also includes a Swashplate menu.
In this menu you can define the neutral point of the collective
pitch function, and adjust the swashplate travel (AFR) of the
mixed functions.
15.7 INFORMATION
This menu provides information about the curr
ently installed
version of the operating system and the application software.
You can also select the language of the screen displays
(German / English) at this point.
This screen also displays the memory space on the D/P card,
together with the transmitter’s identification number.
Version information
Operating system software = Windows CE™;
application software = Editor
.
Display of Memory card storage space
If a D/P card is installed in the transmitter, this
field displays the total memory capacity of the
DP card together with the fr
ee capacity. The free
memory capacity is also displayed in the form of
a number of model memories (model data). The
transmitter can be fitted with a memory card of
up to 1 GB capacity, which corresponds to
around 7715 model memories
Language select
At this point you can select the language to be
used in the screen displays. Pr
essing the button
field toggles between the two alternatives,
which are German and English. After selecting
your preferred language, switch the transmitter
off in order to store the change.
Product ID
The transmitter’s individual identifica-
tion number.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FX-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FX-40 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FX-40

Robbe Futaba FX-40 User Manual - German - 105 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info