520094
35
Zoom out
Zoom in
Previous page
1/105
Next page
System Menü
FX-40
35
15.5 SWITCH - SWITCH TYPE ASSIGNMENT
It is possible to alter the physical position of the switches A …
H; the procedur
e is described on page 7 of these instructions.
If you make changes to the physical location of the switches
compared to the standard arrangement, you will also need to
adjust the software accordingly, otherwise the on-screen gra-
phical display of switch positions will not be correct.
These adjustments are carried out in this Set-up menu.
Various types of toggle switch, including two-position or three-
position, momentary or latching and combination versions are
available. Push-buttons and rotary controls (pots) can also be
installed instead of the standard items.
A range of special switches with suitable connectors are avai-
lable as optional accessories.
Accessing the Set-up menu
By default the switch display is locked to avoid the danger of
accidentally changing the switch assignment. First pr
ess the
“Lock” button field; it then changes to
“Free”.
Type = switch type select
The following types of switch can be selected:
Lever
= switch with lever
Button = momentary switch
Dial = Dial control (pot)
Mode = switch mode select
The following switch modes can be selected:
Moment= switch with momentary function
(springs back)
ALT = switch with Memory function (stays in
set position)
3P moment = mode select for 3-position momentary
switch
The following switch types can be selected:
Single= switch with single-sided momentary action
Dual = switch with dual momentary action
Posi = 2-position / 3-position switch select
The following varieties of switch can be selected:
2Posi
= two-position switch
3Posi = three-position switch
15.6 TRANSMITTER CONTROL SETTINGS / REVERSE
STICK RESPONSE TIME ADJUSTMENT
Set-up menu for hardware reversing of transmitter controls, for
setting the r
esponse time of the sticks J1 … J4, and for selec-
ting the stick mode.
T
ransmitter control reverse (har
dware reverse)
This menu provides a means of reversing the transmitter con-
trol har
dware, including the primary sticks, rotary knobs, swit-
ches and trim levers. If you carry out a hardware reverse, the
corresponding transmitter control operates in the opposite
direction. This setting does not affect the screen display (per-
centage value / prefix).
We recommend leaving these settings at NORM unless you
have very special requirements. The facility is only intended for
very unusual cases where pilots have become accustomed to
operating particular functions “the wrong way round”,
because it suits their individual flying style.
Stick response time
In this menu you can adjust the speed with which the servos
r
espond to stick movements. The new PCM G3 system is so
fast that many pilots find that they need to familiarise themsel
-
ves with it gradually.
Here you can set a response time for each stick separately by
entering a value in the range 1 … 32: the higher the value you
set, the more slowly the stick movements are passed on to the
servos.
You will also find a Hysteresis (dead zone) point in this menu,
which enables you to set a minimum stick movement after
which the change in position is passed on to the servos. You
can set any value in the range 0 … 32.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FX-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FX-40 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FX-40

Robbe Futaba FX-40 User Manual - German - 105 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info