520094
22
Zoom out
Zoom in
Previous page
1/105
Next page
Changing the frequency
band
FX-40
22
Press the Modulation button
Select the modulation you wish to use, and press “Enter”.
The screen confirms your choice with the message
“Modulation type is changed. sure ?”
Confirm your selected modulation by pressing “Yes”.
The radio link to the receiver is now switched off.
The screen now asks whether you wish to re-activate the
radio transmission of the control signals (Yes), or to conti-
nue without transmitting an RF signal (No).
If you press the “Yes” button, the transmitter resumes bro-
adcasting, but using the newly selected modulation.
NOTE!
If you change the modulation from PCM-G3 to PCM 1024 or
PPM 8-channel, only 8 (+ 1) channels ar
e available to contr
ol
your models, instead of 12 (+ 2).
The transmitter software takes this into account at the model
select stage, and does not display model types with higher
channel counts. If you have already selected a model which
uses more than eight channels, the software blocks the modu-
lation change, and the screen displays the message “8-chan-
nel modulation! Change not possible.”
RECEIVER NUMBER
The last two lines of the “Frequency” Set-up menu ar
e used to
enter the r
eceiver numbers (receiver ID).
An individual number is permanently assigned to every recei-
ver; the number is printed on a label on the back of the recei-
ver.
This receiver ID is stored in the transmitter for each model
memory. When the wireless frequency change process is
used, this receiver number is also transmitted to ensure that
only this particular receiver changes its spot frequency in res-
ponse to the transmitter.
If you have a model equipped with two receivers, you can
enter the number of the second receiver in the line “2nd recei-
ver No.”
Enter the appropriate 7-figure number using the numeric but-
tons, then press “Enter”.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe Futaba FX-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe Futaba FX-40 in the language / languages: English as an attachment in your email.

The manual is 3,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe Futaba FX-40

Robbe Futaba FX-40 User Manual - German - 105 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info